Lighting

Lighting refers to all systems in Source which light up a level to make it look realistic. There are many areas of knowledge about lighting that a source level designer should know, most of which are accessible through this page.

Guides

An example of a well-lit room.

• Adding Light - A beginners tutorial on how to set up a basic light entity.
• Intermediate Lighting - A tutorial dealing with all the light sources in more detail.
• Advanced Lighting - Additional information about lighting.
• Constant-Linear-Quadratic Falloff - An easy-to-read explanation of the old C-L-Q light attenuation system.
• HDR - High Dynamic Range Lighting.

Types

Static Light Sources

Tip:Static lighting is compiled into lightmaps, which illuminate brushes and models, and cubemaps, which provide static reflections. It is free to render, as additional static lights only alter that which is already being processed.

light

A static, omni-directional point light source. (e.g. a naked light bulb or flame.)

light_spot

A static, uni-directional point light source. (e.g. a torch or flashlight) The conical beam angle cannot exceed 90°.

light_environment

Provides two linked light sources:

• A diffuse 'ambient' light (representing reflected light from clouds and the atmosphere in general) that emits from all skybox surfaces
• A directional 'brightness' light (representing sunlight or moonlight) that is only cast in a single direction.

Both are emitted from the toolsskybox and toolsskybox2d materials wherever they are used in a map. See also Skybox.

env_particlelight

Illuminates particles produced by env_smokestack. Particles are not affected by normal lighting. Use (no more than) two of these to make env_smokestack particles appear to reflect ambient lighting.

light_directional (in all games since )(also in )

Essentially a second (or third, or…) one of the direct light from light_environment. Like light_environment's direct light, it is emitted only from brush faces textured with toolsskybox. Unlike light_environment, it can be toggled or use lightstyles without significant bugs.

Glowing Textures

Any brush surfaces with a light-emitting material (as defined in a RAD file, either the one in your mod directory or the one in sourcesdk/bin/) applied will cast volumetric light in a 180° cone.

Static Light Receivers

Brushes

The "Lightmap Scale" tool in the Hammer Face Edit Dialog can be used to control how sharp or diffuse the lightmap of a brush surface will be—an effect most noticeable between areas of high contrast, e.g. shadows. Note that, while adding extra light sources will not significantly affect performance, decreasing lightmap scale (i.e., increasing resolution) will more directly increase map file size and memory usage.

prop_static

Unlike other model entities, prop_statics are lit statically: a lighting value is stored for every vertex, and the model's collision mesh (or, optionally, reference mesh) is used to calculate lightmap shadows.

There are the following options:

• disableshadows - Do not cast lightmap shadows
• disablevertexlighting - Only store a single lighting value for the entire model
• disableselfshadowing - Prevents the entity from casting shadows on itself
• ignorenormals - Ignores normals of vertex data to calculate lighting. This is extremely useful for foliage and other thin types of vertex meshes.
• generatelightmaps (only in ) - Allows the props to use lightmaps (like world brushes) if VRAD is run with -StaticPropLighting and the prop is not bumpmapped. Lightmap resolution can be configured with lightmapresolutionx and lightmapresolutiony. Can also be manually defined with the $lightmap shader parameter, including on non-static props.

Warning:There are a number of caveats related to lighting on prop_static. See its page for detailed info.

All non-internal brush entities (in all games since )

Use the vrad_brush_cast_shadows keyvalue to allow them to cast lightmap shadows. Might be !FGD in some games.

Dynamic Light Sources

Tip:Dynamic lighting is calculated at runtime, which makes it expensive to render.

env_projectedtexture shines from a doorway.

light_dynamic

A simple, uni-directional dynamic light that can be moved, turned, and adjusted.

point_spotlight

A dynamic spotlight beam effect, with an optional dynamic light source where it hits a surface.

npc_spotlight

A spotlight NPC, similar to point_spotlight, but with the capability of tracking targets.

env_projectedtexture

A dynamic light that lights with a texture rather than a solid color and "subtracts" realistic dynamic shadows. Affects all surfaces that can accept lighting, and is used for the player's flashlight in Half-Life 2: Episode Two .

• In games since Portal 2, most visible dynamic entities can have texture projection disabled with the disableflashlight keyvalue, and they can have it toggled at runtime with the EnableReceivingFlashlight and DisableReceivingFlashlight inputs. Their shadow-casting behavior, however, must be controlled separately (see under Dynamic Shadows). In earlier games, this behavior can still be controlled via the EF_NOFLASHLIGHT effect flag (see below).

Effect flags !FGD

Most entities with a parent can have EF_BRIGHTLIGHT or EF_DIMLIGHT applied to them to have them radiate dynamic light of the appropriate brightness.

Dynamic Shadows

Tip:Dynamic shadows are cast only by world models (NPCs, phys-props, etc), and only onto brush surfaces (from both Static and Dynamic light sources). They are calculated at runtime, so they are quite crude and relatively expensive to render.

Warning: In games since Left 4 Dead, the direction of a shadow is calculated on a per-entity basis, and dictated by the closest light to the entity. This is not the case in games up to (and including) Source 2013, unless you apply Dynamic RTT shadow angles in Source 2007 to your mod.

Warning:Dynamic shadows can sometimes project through walls and floors, giving away the location of players or objects. Use info_no_dynamic_shadow to get around this problem if you encounter it.

Note:Shadows are "cast" by the visual mesh only if there is no shadowlod defined in the QC. Shadow LODs are just low detail meshes used to generate the shadow. These don't apply to shadowmapping (flashlights and other env_projectedtexture-based effects).

Note:Dynamic shadows do not merge with each other or with lightmaps when they overlap. This can produce undesirable "doubling-up" effects when, for instance, physics props are placed on a phys prop table. You can enable and disable shadows on dynamic entities to work around this. CSM does not have this issue.

Note:Dynamic shadows support translucency. If your model has varying levels of opacity, it can show up in the shadow as seen here.

Todo: link broken, find another example

shadow_control

Point entity used to control Dynamic shadow projections for the entire map, including maximum distance cast, direction cast, and sharpness/diffuseness.

info_no_dynamic_shadow

Point entity used to list brush surfaces that should not receive Dynamic shadows.

Most dynamic visible entities

Have a shadowcastdist keyvalue to override how far these objects cast Dynamic shadows, a disableshadows keyvalue to control whether they cast Dynamic shadows, and EnableShadow and DisableShadow inputs to control Dynamic shadows cast by them. In games since Portal 2, they also have disableshadowdepth to prevent them casting shadows from env_projectedtexture.

Effect flags !FGD

Most entities with a parent can have various effect flags applied to them to regulate many of the same effects as the aforementioned keyvalues, even if they don't have those keyvalues in your version of Source.

Tyndall Effects

Tyndall effects are caused by light scattering on suspended (colloid) particles in a transparent medium. E.g., car headlights in fog.

• Halo (Glow Sprite) effects :

• env_sprite - entity used to create omni-directional glow or flare effects.
• env_lightglow - an asymmetrical glow (for areas of contrasting light).
• env_sun - adds a bright haloed spot to the Skybox to represent the position of the Sun or Moon.

• Lightbeam (Volumetric Light) effects :

• Brush texture : models/effects/vol_light001
• Brush texture : models/effects/vol_light002
• Model : models/Effects/vol_light.mdl - use with prop_static.

• See also Render Modes for sprites, particularly World Space Glow.

Common Values

	Brightness
Car Headlights	231 223 192
Combine lamp	147 226 240
Tungsten bulb	254 216 146
Fluorescent tube (cold)	159 237 215
Flourescent tube (warm)	255 245 145

For values to accompany the stock skybox materials, see Sky List.

Notes

• Naming a static light makes it more expensive. Only name lights when you need to. Multiple lights sharing the same name are cheaper than lights with separate names.
• light_dynamic is especially expensive and will not even show up on some systems
• The basic light entities do not come with a visible representation (e.g. a lightbulb). For that, you need a prop. See HL2 Light Props for a list.
• The basic light entities do not come with a "glow" as you'd expect to see in a foggy or misty area. To provide this, either compile and run the map with HDR enabled, or add a point_spotlight (with dynamic lighting off unless needed), env_lightglow, or env_sprite entity.
• Maps will not be lit unless you run VRAD (or equivalent). VRAD will not run properly and will not calculate realistic light bounces unless the level is free of leaks.
• Moving brushed-based objects will not change the way they are lit. Their lighting will be calculated only according to their positions in Hammer. (e.g. a brush in a dark room will not become bright if it is brought into a bright room.)
• Light can be reflected off surfaces during compile, indirectly illuminating the environment around them. See $reflectivity.

Console Commands

mat_fullbright 2. The bright white physics props seem to be a bug; they are lit correctly when in motion.

mat_fullbright <0-2>

0 is normal lighting.

1 is 'full bright' lighting, where everything is 100% lit. This will be enabled by default if there's no lighting data on the map (BSP), or the map was compiled for HDR lighting only and HDR is disabled.

2 has been introduced with the Orange Box and is 'lighting only'. It replaces all textures' images with a colourless monotone, allowing you to see exactly what is lit, where, and probably how.

See also

• HL2 Light Props
• Color theory (level design)
• Light entities - A list of light entities.
• Intermediate Lighting
• Advanced Lighting
• Window lighting - How to simulate refracted sunlight through openings.
• Light editor

External links

• Understanding and Using Lightmaps (Archived version retrieved on 26 August, 2007)
• Volumetric Lighting (Archived version retrieved on 24 August, 2007)
• Lighting Tutorial - Covers entities & variables with examples (Archived version retrieved on 6 September, 2016)
• Quadratic/Linear/Constant in Lights (Archived version retrieved on 24 November, 2010)
• HDR/Shaped Light/Burning Light/Darkness/Sun/Volumetric (Archived version retrieved on 20 January, 2008)