Team Fortress 2/Creating a Payload Map

This tutorial covers the creation of a pl_goldrush style map.

Layout

This tutorial presumes that you are able to at least create round spawns and the basic layout of the map, presuming that the blue team attacks and the red team defends you will need to have a basic layout for the payload to travel along and know where the capture points will need to go. In this tutorial you will create the train for the payload and all the necessary entities to work the map with 2 capture points on the first round.

Setting up the round

For this tutorial there is only 1 round but has been made with other rounds in mind.

• Create a tf_gamerules and name it GameRules.

• Create a logic_auto entity and select the outputs tab.

	My Output	Target Entity	Target Input	Parameter	Delay	Only Once
	OnMapSpawn	GameRules	SetRedTeamRole	1	0.00	No
	OnMapSpawn	GameRules	SetBlueTeamRole	2	0.00	No
	OnMultiNewMap	GameRules	SetredTeamRespawnWaveTime	4	0.00	No
	OnMultiNewMap	GameRules	SetBlueTeamRespawnWaveTime	8	0.00	No

• Place a team_control_point_master and name it CP_master, and adjust the properties (not all are displayed).

Property Name	Description	Value
Name	Name of the entity	CP_Master
Start Disabled	Self-explanatory	No
Cap Layout	Self-explanatory
Restrict team from winning	Self-explanatory	Red
Switch teams on map win?	Self-explanatory	Yes
Scoring Style	Self-explanatory	Add team score for each captured point
Play all rounds before changelevel	Self-explanatory	Only changelevel after all mini-rounds have been played to completion
Rate at which to give partial cap points for area captures	Self-explanatory	0.1

• Create a team_control_point_round and name it Round_A, presuming that this is the only 1 round and there are only 2 capture points.

Property Name	Description	Value
Name	Name of the entity	CP_Master
Start Disabled	Self-explanatory	No
Print Name	Self-explanatory
Priority	Higher rounds are played first	0
Control points in this round	Self-explanatory	CP_A_1 CP_A_2
Restrict team from winning	Self-explanatory	Red

If you had 2 round then the priority of Round_A would be 1 and Round_B would be 0.

This tutorial presumes that you all ready know how to use a team_round_timer entity and will not be explained here.

Building the payload

Basic payload train.

This section will help you build the train section and the entities needed to get it to function.

• Create a small cube with the tools/toolsclip texture and make it a func_tracktrain remember the train is pointing right on the top view, name this Bomb_Train.
• Create a prop_dynamic and set the model to models/props_trainyard/bomb_cart.mdl, name this Bomb_Model and set the parent to Bomb_Train.
• Using the tools/toolstrigger texture create a box around the train to be used as the capture zone, make this a trigger_capture_area and name it Bomb_CapArea and set the parent to Bomb_Train.
• Create another box using the tools/toolstrigger again around the train, this will be the regen zone. Make this into a dispenser_touch_trigger naming it Bomb_Dispense and setting the parent again to Bomb_Train.
• Create a mapobj_cart_dispenser entity and place it where you want the healing beam to come from, Name this Bomb_DispenseBeam and set the parent to Bomb_Train (set the team to Blue and the custom touch trigger to Bomb_Dispense and that is all that is needed for the healing zone)
• Place a math_remap entity above the train and name it Bomb_Remap.
• Finally place a logic_case entity above the train and name it Bomb_LogicCase.

Activating the payload

You should now have what looks like a bomb surrounded by 3 cubes and a few entitys, in this section you will need to set the values, the inputs and the outputs required to get the train working.

Cap Zone

First set up the capture zone.

• Click on and find the properties of the Bomb_CapZone, we will be using CP_A_1 as the first capture point

Property Name	Description	Value
Name	Name of the entity	Bomb_CapZone
Start Disabled	Self-explanatory	No
Parent	Self-explanatory	Bomb_Train
Control Point	The cap assigned to this trigger	CP_A_1
Can RED cap?	Self-explanatory	No
Can BLUE cap?	Self-explanatory	Yes
Number of RED players to cap	Self-explanatory	1
Number of BLUE players to cap	Self-explanatory	1
RED spawn adjust	How much to change the spawn time on cap	0
Blue spawn adjust	How much to change the spawn time on cap	0
Time to cap	Self-explanatory	99999

• Now select the outputs tab and create 2 new outputs, Watcher_A will be created later and is used to display the trains progress on the HUD.

	My Output	Target Entity	Target Input	Parameter	Delay	Only Once
	OnNumCappersChanged	Bomb_Remap	InValue	<none>	0.00	No
	OnNumCappersChanged	Watcher_A	SetNumTrainCappers	<none>	0.00	No

Remap

Now we can set up the Bomb_Remap entity, this is used to limit the number of player caps from 0 to 3 and the train will only have 3 speed (It is possible to create a greater number of train speeds).

• Click on the Bomb_Remap entity and find the properties.

Property Name	Description	Value
Name	Name of the entity	Bomb_Remap
Start Disabled	Self-explanatory	No
Minimum Valid Input Value	Self-explanatory	0
Maximum Valid Input Value	Self-explanatory	3
Output Value When Input Is Min	Self-explanatory	0
Output Value When Input Is Max	Self-explanatory	3

• Now select the outputs tab and create a new output, this will send the amended value to the Bomb_LogicCase.

	My Output	Target Entity	Target Input	Parameter	Delay	Only Once
	OutValue	Bomb_LogicCase	InValue	<none>	0.00	No

Logic Case

We are now able to setup the Bomb_LogicCase to set the speed of the train on its path.

• Again click on and find the properties of the Bomb_LogicCase.

Property Name	Description	Value
Name	Name of the entity	Bomb_LogicCase
Case 01	Self-explanatory	0
Case 02	Self-explanatory	1
Case 03	Self-explanatory	2
Case 04	Self-explanatory	3

The rest can be ignored.

• Now select the outputs tab and create a new output, this will send the amended value to the Bomb_LogicCase.

	My Output	Target Entity	Target Input	Parameter	Delay	Only Once
	OnCase01	Bomb_Train	SetSpeedDirAccel	0	0.00	No
	OnCase02	Bomb_Train	SetSpeedDirAccel	0.5	0.00	No
	OnCase03	Bomb_Train	SetSpeedDirAccel	0.75	0.00	No
	OnCase04	Bomb_Train	SetSpeedDirAccel	1	0.00	No

The outputs will show as broken but will work later.

Train

We can work on the Bomb_Train, this tutorial presumes that you want the mine cart sounds from gold rush itself.

• This time on the properties of the Bomb_Train you will need to turn smart edit off temporarily and create 3 new key variables.

Key	Value
ManualAccelSpeed	70
ManualDecelSpeed	150
ManualSpeedChanges	1

• You can now turn smart edit back on and begin changing the other properties of Bomb_Train, presuming that Track_A_01 is the first point of the track, not all values will be shown here.

Property Name	Description	Value
Name	Name of the entity	Bomb_Train
First Stop Target	Self-explanatory	Track_A_01
Max Speed	Self-explanatory	90
Change Velocity	How the acceleration is handled	Linear blend
Distance Between the Wheels	Self-explanatory	20
Height above Track	Self-explanatory	1
Damage on Crush	Self-explanatory	99999
Move Sound	Self-explanatory	Cart.Roll
Start Sound	Self-explanatory	Cart.RollStart
Stop Sound	Self-explanatory	Cart.RollStop

The Bomb_Train doesent have any outputs but does require a few flags to be enabled.

• Click on the Flags tab and enable No User Control and Is unblockable by player.

Building the Track

Trains path.

You now have a working train but you will now need to build a line for it to run on.

• Create a path_track entiry and place it where you want to start the track, Name this Track_A_01.
• Create another path_track and place it where you next want the line to follow and name this Track_A_02.
• Click back on Track_A_01 and set Next Stop Target to Track_A_02.
• Keep creating new path_track and continue naming and linking them in the line you want the train to follow.

Adding a Capture Point

There can be 1 to 3 capture points per round making 2 different types, mid point captures and final captures.

Mid point cap

Middle capture point.

First create a logic_relay next to the cap and name it CP_A_1_Relay, this is used to trigger a number of actions and can be used to open mid point gates or close other gates, use this to add time to the round timer and to change the skin of any models you have at the mid point.

• Select CP_A_1_Relay and select the outputs tab.

	My Output	Target Entity	Target Input	Parameter	Delay	Only Once
	OnTrigger	Bomb_CapArea	CaptureCurrentCP		0.00	No

You will need to find the path_track in the middle of the cap, in this example it's Track_A_24.

• Select the middle path_track and got to the outputs tab.

	My Output	Target Entity	Target Input	Parameter	Delay	Only Once
	OnPass	CP_A_1_Relay	Trigger		0.00	Yes
	OnPass	CP_A_1	SetOwner	3	0.20	No

This tutorial presumes that you know how to create a team_control_point, name this CP_A_1 and set the owner to Red.

• Don't forget on the properties to set warning type to No Announcements, the announcements are handled by the team_train_watcher.
• Open the outputs tab and add the following.

	My Output	Target Entity	Target Input	Parameter	Delay	Only Once
	OnCapTeam2	Track_A_23	DisablePath		0.00	No
	OnCapTeam2	Bomb_CapArea	SetControlPoint	CP_A_2	0.00	No

This disables the path behind the train and prevents it rolling back, it also sets up the next capture point.

End point cap

The end point is set up in exactly the same way as a mid point, the only difference is what you want to do with it.

• The main difference is you will need to disable the Bomb_CapZone and the Bomb_Dispense, you can use the logic_relay and the end point to disable them.

If you intend to have another round you can use the trigger to keep the train moving along the path, you will then need to stop it when it reaches it next starting point, you will also need to disable the team_train_watcher presumed to be Watcher_A in this example and to enable the next team_train_watcher when needed.

Train Watcher

The final stage is to add in the train display, which is also used to tell when the train should start rolling back.

• Create a team_train_watcher and name this Watcher_A.
• Presuming that there are 2 caps and the path_track are changed where needed set the properties to.

Property Name	Description	Value
Name	Name of the entity	Watcher_A
Start Disabled	Self-explanatory	No
Train to watch	Self-explanatory	Bomb_Train
Node that the path starts at	Self-explanatory	Track_A_01
Node that the path ends at	Self-explanatory	Track_A_43
Linked PathTrack 1	Self-explanatory	Track_A_24
Linked CP 1	Self-explanatory	CP_A_1
Linked PathTrack 2	Self-explanatory	Track_A_43
Linked CP 2	Self-explanatory	CP_A_2
Linked PathTrack 3	Self-explanatory
Linked CP 3	Self-explanatory
Min Speed for Speed level 1	Self-explanatory	1
Min Speed for Speed level 2	Self-explanatory	60
Min Speed for Speed level 3	Self-explanatory	80

• now select the outputs tab.

	My Output	Target Entity	Target Input	Parameter	Delay	Only Once
	OnTrainStartRecede	Bomb_Train	SetSpeedDirAccel	-0.2	0.00	No

This will cause the train to start moving backwards at 0.2 of the maximum speed.

Theory

You should now have at least a fully working 1 stage round of payload style game play, if you have taken in this tutorial fully you should be able to change the number of rounds and capture point to anything you need. If you have any questions or complaints, post them on the talk page.