|
|
| Line 1: |
Line 1: |
| {{lang|$envmap}} | | {{lang|$envmap}} |
| [[File:Specular.jpg|thumb|Specular reflections at full intensity.]]
| | {{MultiPage}} |
| {{For|the set of material parameters used to mask specular reflections via textures|[[$envmapmask]]}} | |
| | |
| {{Shaderparam|$envmap}} It creates [[wikipedia:specular reflection|specular reflection]]s, which are seen on smooth surfaces. It does this by defining an "environment map" (specifically a [[cubemap]]) to draw as a reflection; normally that of the nearest {{ent|env_cubemap}} entity. The reflection is not dynamic.
| |
| | |
| {{note|<code>$envmap</code> actually works in the latest [[Source]] engine version (v24) of {{game name|hls|name=Half-Life: Source}} if it uses an <code>env_cubemap</code>. The issue actually comes from the {{ent|buildcubemaps}} command, since if the cubemaps are built in another game and then the BSP is added into HL:S, they will work fine. Is not clear if in older versions there were more issues but due such problems, Valve used static reflective images for every reflective texture in the game.}}
| |
| | |
| The other form of reflection supported by Source is the diffuse [[$phong|Phong]] type.
| |
| | |
| == Syntax==
| |
| <pre>
| |
| $envmap env_cubemap
| |
| </pre>
| |
| | |
| "env_cubemap" is normally used, as it tells [[VBSP]] to swap in the name of the nearest <code>env_cubemap</code> when the map compiles. However it is also possible to use a static cubemap image that has been manually created.
| |
| | |
| {{note|If <code>$envmap</code> is used without specifying {{ent|$basetexture}}, the specular reflections will be force drawn regardless of anything.}}
| |
| {{note|Most Cubemap textures will have no reflectivity when used as overlays or decals. It is unclear why this is so{{clarify}}.}}
| |
| {{note|Cubemap transparency is affected by the {{ent|$basetexture}} alpha/transparency map even when using $envmapmask. This causes conflicting problems.}}
| |
| | |
| == Creating a custom static cubemap texture==
| |
| | |
| Creating a custom cubemap texture might be required for some circumstances and is used occasionally in some Valve models.
| |
| | |
| === In [[VTFEdit]]===
| |
| | |
| For this to work you will need to have the 6 sides of the cubemap saved as individual textures in the correct orientation for it to appear correctly in the Source Engine. So some faces might need to be rotated either clockwise or counter clockwise. Each face will need to be mirrored horizontally before orientation.
| |
| {{note|Pre-{{Game name|as|name=Alien Swarm}} games require 7 faces for the cubemap to work. The seventh in this case is a round texture, used as a sphere map for the <code>$envmapsphere</code> parameter.}}
| |
| | |
| To the right hand side of this page you will find two guide images to aid in properly rotating each side of your environment render.<br>
| |
| Save one or both of those guides on your computer and then import your environment render onto it or recreate it in a smaller scale, then rotate your sides as instructed by the images.<br>
| |
| Save every side as a separate image file, their names should be the number found on that specific square. This will ensure that the environment texture will be built correctly, as the numbers also represent the import order in [[VTFEdit]].
| |
| | |
| [[File:Cubemap T assembly guide.png|thumb|Orientation guide for T-assembled environments. Click to enlarge]]
| |
| [[File:Cubemap Blender-Render assembly guide.png|thumb|Orientation guide for {{Blender}} render results. Click to enlarge]]
| |
| | |
| Once you have all the image sides ready you can just import them all into VTFEdit and select "Environment Map". [[Valve_Texture_Format#Image_data_format_table|Texture format]] is up to you, generally DXT5 will do.
| |
| | |
| [[File:Cubemap_tut1_cra0.jpg]]
| |
| | |
| Then just save it all as a .vtf file and use it in your VMT like so:
| |
| | |
| <pre>
| |
| "$Envmap" "effects/my_cubemap"
| |
| </pre>
| |
| "effects" is the usual folder for environments/cubemaps You may put yours anywhere you like
| |
| === In VTEX===
| |
| | |
| VTEX will automatically mirror and orient your faces, you need only to provide correctly named textures. Name each file something like envmap001a*.tga, where * is put '''BK, FT, LF, RT, UP, or DN'''. If you took a cubemap screenshot in-game, this step will already by done, but to make them work properly with Vtex.exe you must use HDRShop (but before you need to change textures format to BMP, because HDRShop can only work with that kind of format) and then covert them to PFM files format.
| |
| | |
| {{todo|What axis does each direction relate to?}}
| |
| ;
| |
| [[File:Cubemap_axis_reference_1.jpg]]
| |
| | |
| Create a text file the same name as your textures (e.g. envmap001a.txt). If building for HDR write in the following, otherwise leave it blank:
| |
| | |
| <code>'''pfm 1'''<br /></code>
| |
| <code>'''pfmscale 1'''<br /></code>
| |
| <code>'''nocompress 1'''<br /></code>
| |
| | |
| Put these files into materialsrc and then just drag-n-drop .txt file into vtex.exe and you should end up with a working cubemap! HDR envmaps will be named like envmap001a.hdr.vtf, and only need to exist to work.
| |
| | |
| == Parameters and Effects ==
| |
| | |
| <span id="$envmapmask"></span>
| |
| {{MatParam|$envmapmask|texture|See {{ent|$envmapmask}}. A texture file that determines per-[[texel]] reflection intensity.}}
| |
| <span id="$envmaptint"></span>
| |
| {{MatParam|$envmaptint|RGB matrix|Controls the intensity of the reflection's [[RGB|red, green and blue]] color channels. Any positive number can be used. Default is <code>"[1 1 1]"</code>, which means 100% intensity. {{note|You ''must'' use quotemarks, as there are space characters within the value.}} {{tip|This command is often used to dim the brightness of a specular reflection without the overhead of an <code>$envmapmask</code>.}}}}
| |
| <span id="$envmapcontrast"></span>
| |
| {{MatParam|$envmapcontrast|normal|Controls the [[Wikipedia:Contrast (vision)|contrast]] of the reflection. 0 is natural contrast, while 1 is the full squaring of the color (i.e. color*color).
| |
| : {{note|Will not work when Phong is enabled.}}
| |
| : {{tip|Use higher contrasts to diminish relatively darker areas and increase "hot spots".}}}}
| |
| <span id="$envmapsaturation"></span>
| |
| {{MatParam|$envmapsaturation|RGB matrix|Controls the color saturation of the reflection. 0 is greyscale, while 1 is natural saturation. R, G and B can be de/oversaturated respectively using <code>"[r g b]"</code>
| |
| : {{note|In the Shadercode for {{src13|2}} and {{as|2}} the parameter is defined as a float parameter. However it will be used as a vec3 and the Shader expects and uses it as such.}}
| |
| : {{note|Will not work when [[Phong]] is enabled on models.}}
| |
| : {{bug|{{css}} Works only on models.}}}}
| |
| <span id="$envmapframe"></span>
| |
| {{MatParam|$envmapframe|int|The frame to start an animated cubemap on.}}
| |
| <span id="$envmapmode"></span>
| |
| {{MatParam|$envmapmode|int|Depreciated MATERIAL_VAR_ENVMAPMODE {{=}} (1 << 25), // OBSOLETE|deprecated=1}}
| |
| <span id="$basetexturenoenvmap"></span>
| |
| {{MatParam|$basetexturenoenvmap|and=$basetexture2noenvmap|bool|Used for materials with two [[albedo]]s, to make one or the other matte. See also {{ent|$basetexture}} and {{ent|$basetexture2}}.
| |
| :{{note|Superseded in {{csgo}} by <code>[[$envmapmask#CS:GO_WorldVertexTransition_Parameters|$envmapmask2]].</code>}}|dx9=1|shaders=WorldVertexTransition|removed={{csgo}}}}
| |
| <span id="$envmapoptional"></span>
| |
| {{MatParam|$envmapoptional|choices|Sets the oldest [[DirectX Versions|DirectX version]] that should draw the reflection. Choose from:
| |
| :*<code>80</code> (DirectX 8)
| |
| :*<code>81</code> (DirectX 8.1)
| |
| :*<code>90</code> (DirectX 9)
| |
| :*<code>95</code> (DirectX 9 with Shader Model 3)|removed={{l4d}}}}
| |
| <span id="$envmapsphere"></span>
| |
| {{MatParam|$envmapsphere|bool|Determines whether the material's envmap should be a spheremap (deprecated) instead of a cubemap. Set this to 1 to use a spheremap.|deprecated=1|removed={{as}}}}
| |
| <span id="$noenvmapmip"></span>
| |
| {{MatParam|$noenvmapmip|bool|Only use the top-level mipmap of the cubemap.|only={{csgo}}|shaders=LightmappedGeneric}}
| |
| [[File:Reflection tinting example.png|thumb|200px|A vent without and with reflection tinting. The bottom image lists the material parameters used to create the effect.]]
| |
| <span id="$fresnelreflection"></span>
| |
| {{MatParam|$fresnelreflection|float|Adds a [http://www.3drender.com/glossary/fresneleffect.htm Fresnel effect] to the reflection. 0 is none, while 1 applies the full effect, similar to <code>[[Water_(shader)|Water]]</code>. The effect becomes multiplied with values higher than 1.|since={{src06}}|shaders=LightmappedGeneric, Lightmapped_4WayBlend, WorldVertexTransition}}
| |
| <span id="$envmapfresnel"></span>
| |
| {{MatParam|$envmapfresnel|float|The same as <code>$fresnelreflection</code>, but for <code>VertexLitGeneric</code>. By default, this will use the fresnel ranges set by <code>$phongfresnelranges</code>.
| |
| : {{note|Only works with Phong enabled before {{l4d}}.}}
| |
| |since={{src07}}|dx9=1|shaders=VertexLitGeneric}}
| |
| [[File:Anisotropic reflection example.jpeg|thumb|200px|An in-game example of anisotropic reflections, with $envmapanisotropyscale set to 1.]]
| |
| <span id="$envmapfresnelminmaxexp"></span>
| |
| {{MatParam|$envmapfresnelminmaxexp|vector|Sets fresnel ranges for <code>VertexLitGeneric</code> materials using <code>$envmapfresnel</code> without phong. By default <code>"[0 1 2]"</code>, making surfaces facing the viewer less reflective than surfaces facing sideways.
| |
| : {{Note|The fresnel values for this parameter are '''not''' the same as those for <code>[[$phong|$phongfresnelranges.]]</code>Instead, the first value is the minimum amount of fresnel, the second value is the maximum, and the final value is exponent.}}
| |
| : {{bug|Cannot be used with {{ent|$bumpmap}}. <code>$phongfresnelranges</code> must be used instead.}}|since={{l4d}}|shaders=VertexLitGeneric}}
| |
| <span id="$envmaplightscale"></span>
| |
| {{MatParam|$envmaplightscale|float|Tint the surface's specular reflection with its lightmap. This matches a surface's reflection with its diffuse lighting and acts as rudimentary reflection occlusion. With a value of 1, a surface will have no reflection if it isn't lit at all. For models in {{csgo}}, vertex lighting is used for the tinting instead of a lightmap.{{note|Values above 1 for this parameter are technically permitted, but start inverting the effect.}}|since={{as}}|shaders=LightmappedGeneric, Lightmapped_4WayBlend ({{csgo}}), VertexLitGeneric ({{csgo}}), WorldVertexTransition ({{csgo}})}}
| |
| <span id="$envmaplightscaleminmax"></span>
| |
| {{MatParam|$envmaplightscaleminmax|vector2|Thresholds for the lightmap reflection tinting effect. Setting the minimum value higher increases the minimum light amount at which the reflection gets nerfed to nothing.|only={{csgo}}|shaders=LightmappedGeneric, Lightmapped_4WayBlend, VertexLitGeneric, WorldVertexTransition}}
| |
| <span id="$envmapanisotropy"></span>
| |
| {{MatParam|$envmapanisotropy|bool|Enables anisotropic reflection emulation by warping the reflection downwards.{{bug|Does not work with {{ent|$normalmapalphaenvmapmask}}}} {{bug|Does not work with {{ent|$basealphaenvmapmask}} except {{ent|Lightmapped_4WayBlend}}}} {{note|Requires a {{ent|$bumpmap}} to be present.}}|only={{csgo}}|shaders=LightmappedGeneric, Lightmapped_4WayBlend, WorldVertexTransition}}
| |
| <span id="$envmapanisotropyscale"></span>
| |
| {{MatParam|$envmapanisotropyscale|normal|The amount the reflection should be warped by.|only={{csgo}}|shaders=LightmappedGeneric, Lightmapped_4WayBlend, WorldVertexTransition}}
| |
| | |
| == Console commands ==
| |
| | |
| {{IO|[[buildcubemaps]]|Generates cubemaps for use in materials. If this isn't run, objects will reflect the skybox (OB) or have an invalid reflection, white in Ep1 and pink checkerboards in MP.}}
| |
| {{IO|envmap|Generates an environment map at the player's position and dumps it in cubemap_screenshots/, in five separate PFM files.}}
| |
| {{IO|mat_fastspecular|param=bool|Quickly disable or enable specular rendering without reloading materials. This does not affect performance, only appearance. <code>mat_specular</code> must be used for proper performance testing.
| |
| : {{bug|Doesn't work in some games.}}}}
| |
| : {{note|Despite common misconception, setting this to 0 does ''not'' enable a "fancy specular" mode, it simply disables specular rendering entirely.}}
| |
| {{IO|mat_specular|param=bool|Disable or enable specular reflections, unloading or loading the specular materials from memory. Default 1.}}
| |
| {{IO|r_showenvcubemap|param=bool|Debug command to display cubemaps on all dynamic objects at full intensity. It was used to create the image at the start of this article.}}
| |
| | |
| == See Also ==
| |
| | |
| * [[$envmapmask]] (specular mask)
| |
| * [[$phong]] (for diffuse reflection)
| |
| * [[Cubemap]]
| |
|
| |
|
| [[Category:List of Shader Parameters|E]] | | [[Category:List of Shader Parameters|E]] |
| [[Category:VMT Reflections]] | | [[Category:VMT Reflections]] |
Note:Archived page history
Important:These pages are linked often from page history logs so Special:WhatLinksHere will not show anything.
