Creating an incinerator

← Portal Level Creation

This article or section needs to be cleaned up to conform to a higher standard of quality.
For help, see the VDC Editing Help and Wikipedia cleanup process. Also, remember to check for any notes left by the tagger at this article's talk page.

Warning:This tutorial is incomplete/possibly inaccurate! Someone experienced with Portal mapping is required to check for errors.

Introduction

In this tutorial you will learn how to make an Aperture Science Emergency Intelligence Incinerator that will open when a certian box is placed into it, and open when that box is placed on a 1500-Megawatt Aperture Science Heavy-Duty Supercolliding Superbutton.

Instructions

Step 1 - The Box

1. Create a prop_physics with the following properties:

   Property Name	Value
   Name	victim_box
   World Model	models/props/metal_box.mdl

Step 2 - The Incinerator

2. Create a prop_dynamic with the following properties:

   Property Name	Value
   Name	incinerator
   World Model	models/props_bts/glados_aperturedoor.mdl

3. Create a room under it with the walls textured with "metal/metalwall048c_gradient" and the floors textured with "lights/light_orange001".
4. Create a filter_activator_name nearby your button with the following properties:

   Property Name	Value
   Name	filter_victim_box
   Filter Name	victim_box

5. Create a 2 unit tall trigger_once covering the bottom of the room with the following properties:

   Property Name	Value
   Name	trigger_door1
   Filter Name	filter_victim_box

Step 3 - The Door

6. Refer to Creating_a_button_and_door#The_door_setup for door creation.

Step 4 - The Button

How to align the button models.
7. Create a prop_static with the following properties:

   Property Name	Value
   World Model	models/props/button_base_reference.mdl

8. Create a prop_dynamic aligned on top of the prop_static with the following properties:

   Property Name	Value
   Name	button_top_model
   World Model	models/props/button_top_reference.mdl

9. Create an ambient_generic with the following properties:

   Property Name	Value
   Name	button_down
   Sound Name	Portal.button_down
   Source Entity Name	button_top_model

10. Create another ambient_generic with the following properties:

    Property Name	Value
    Name	button_up
    Sound Name	Portal.button_up
    Source Entity Name	button_top_model

Create a 58Wx58Lx9H cylinder func_door with 8 sides with the following properties:

Property Name	Value
Name	button_top_door
Speed	25
Delay before Reset	-1
Move Direction	90 0 0 (or Down)

Give it the following outputs:

	My Output	Target Entity	Target Input	Parameter	Delay	Only Once
	OnClose	button_up	PlaySound	<none>	0.00	No
	OnOpen	button_down	PlaySound	<none>	0.00	No

Move it underneath your prop_dynamic, and Uncheck all flags.
11. Set the Parent of button_top_model to "button_top_door".

The larger trigger_multiple.
12. Create a 48Wx48Lx1H trigger_multiple with the following properties:

    Property Name	Value
    Name	button_trigger_player

    Place it right on top of the button_top_model.

The smaller trigger_multiple.
13. Next create a 7Wx7Lx1H cylinder trigger_multiple with 8 sides and the following properties:

    Property Name	Value
    Name	button_trigger_box
    Filter Name	button_filter_boxes

    Change the flags so only "Physics Objects" is set, and place it directly on top and in the center of the button_top_model
14. Select "button_trigger_player" and setup the Output as below:

    	My Output	Target Entity	Target Input	Parameter	Delay	Only Once
    	OnEndTouchAll	button_trigger_box	Enable	<none>	0.00	No
    	OnEndTouchAll	button_top_door	Close	<none>	0.00	No
    	OnStartTouch	button_trigger_box	Disable	<none>	0.00	No
    	OnStartTouch	button_top_door	Open	<none>	0.00	No

15. Select the smaller, cylinder trigger_multiple, "button_trigger_box" and setup the Output as below:

    	My Output	Target Entity	Target Input	Parameter	Delay	Only Once
    	OnEndTouchAll	button_trigger_player	Enable	<none>	0.00	No
    	OnEndTouchAll	button_top_door	Close	<none>	0.00	No
    	OnStartTouch	button_trigger_player	Disable	<none>	0.00	No
    	OnStartTouch	button_top_door	Open	<none>	0.00	No


The final product.
16. Create a light completely underneath the top of the button but still inside the base with the following properties:

    Property Name	Value
    Brightness	251 159 57 30
    BrightnessHDR	251 159 57 20

    Note:The light should be 2 Units above the original base ground that the main base Button model is on, in order to cast correctly.

Temp

(This section is being used to store information during the current edit. Do not modify)

	My Output	Target Entity	Target Input	Parameter	Delay	Only Once
	OnUser1	incinerator	SetAnimation	open	0.00	No
	OnUser1	incinerator	SetAnimation	close	4.00	No

See also

• Portal Level Creation