Porting humanoids to Portal 2: Difference between revisions

From Valve Developer Community
Jump to navigation Jump to search
m (Added categories)
(Replaced content with "{{Multipage}}")
Tag: Replaced
Line 1: Line 1:
[[Category:Entities]]
{{Multipage}}
[[Category:Level Design]]
[[Category:Choreography creation]]
[[Category:NPCs]]
[[File:Gman in p2.png|thumb|right|The [[G-Man]] in {{portal2|4}}, complete with working eyes and flex animation. ]]
{{portal2|4}}, due to numerous and sometimes unknown bugs, will not support the direct (i.e. "drag'n'drop") porting of humans and humanoids, such as those from {{hl2|4}}.<br>
By porting these models using this method, the humanoids will crash [[Hammer]], [[HLMV]] and {{portal2|4}} itself. By following this guide, you will be able to successfully port humanoid models to {{p2|4}}.
 
==Decompiling==
# Extract the .mdl, .dx90.vtx, .dx80.vtx (if applicable), and .phy files from the VPK you are porting from, and place them in a handy directory.{{Note|If you are porting humanoids from {{hl2|2}} you will need to also extract the {{Code|preset=2|male_gestures.mdl , male_postures.mdl, male_shared.mdl and male_ss.mdl/female_gestures.mdl , female_postures.mdl, female_shared.mdl and female_ss.mdl}} models otherwise the game '''will''' crash. These just have to be recompiled and the $attachment step can be skipped.}}
# Download [[Crowbar]], if you haven't already, download it by following the links [http://steamcommunity.com/groups/CrowbarTool here.]
# Open Crowbar's .exe file (you may have to extract the archive first). Open the {{Code|preset=3|Decompile}} tab and under {{Code|preset=2|MDL file or folder}} browse to the .mdl of the model you are converting. Under {{Code|preset=2|Output Folder}}, choose a nice clean directory to extract the files to. It is recommended to use the {{Code|preset=2|Full Path}} option, but it's completely up to the user. Under {{Code|preset=2|Options}}, make sure your options are the same as shown in the image below:
[[File:Crowbar decomp settings.png|790px|frame|center|[[Crowbar]] decompilation options as of version 0.74.]]
 
==Recompiling==
# Find the .QC file and open it in a text editor and look for the line beginning with [[$attachment]]. It should look something like this:<syntaxhighlight lang="c">
$Attachment "eyes" "ValveBiped.Bip01_Head1" 3.23 -3.49 0.12 rotate 0 -80.1 -90
$Attachment "mouth" "ValveBiped.Bip01_Head1" 0.6 -5.5 0 rotate 0 -80 -90
$Attachment "chest" "ValveBiped.Bip01_Spine2" 5 4 0 rotate 0 90 90
$Attachment "forward" "ValveBiped.forward" 0 0 0 rotate 0 0 0
$Attachment "anim_attachment_RH" "ValveBiped.Anim_Attachment_RH" 0 0 0 rotate -90 -90 0
$Attachment "anim_attachment_LH" "ValveBiped.Anim_Attachment_LH" 0 0 0 rotate -90 -90 0
$Attachment "anim_attachment_head" "ValveBiped.Bip01_Head1" 0 0 0 rotate -90 -90 0
</syntaxhighlight>{{Note| If you see attachments named "EyeRightAttach" and "EyeLeftAttach", proceed to '''Step 4'''.}}
# Copy and paste the line that contains "eyes" in this section twice. Change "eyes" to "EyeRightAttach" in the first copy, and to "EyeLeftAttach" in the second. The section should now look something like this.<syntaxhighlight lang="c">
$Attachment "EyeRightAttach" "ValveBiped.Bip01_Head1" 3.23 -3.49 0.12 rotate 0 -80.1 -90
$Attachment "EyeLeftAttach" "ValveBiped.Bip01_Head1" 3.23 -3.49 0.12 rotate 0 -80.1 -90
$Attachment "eyes" "ValveBiped.Bip01_Head1" 3.23 -3.49 0.12 rotate 0 -80.1 -90
$Attachment "mouth" "ValveBiped.Bip01_Head1" 0.6 -5.5 0 rotate 0 -80 -90
$Attachment "chest" "ValveBiped.Bip01_Spine2" 5 4 0 rotate 0 90 90
$Attachment "forward" "ValveBiped.forward" 0 0 0 rotate 0 0 0
$Attachment "anim_attachment_RH" "ValveBiped.Anim_Attachment_RH" 0 0 0 rotate -90 -90 0
$Attachment "anim_attachment_LH" "ValveBiped.Anim_Attachment_LH" 0 0 0 rotate -90 -90 0
$Attachment "anim_attachment_head" "ValveBiped.Bip01_Head1" 0 0 0 rotate -90 -90 0
</syntaxhighlight>
#Save and close the QC.
# Open Crowbar and switch to the {{Code|preset=3|Compile}} tab. Under {{Code|preset=2|QC input}}, browse to the QC file you just opened and select it.
# For {{Code|preset=2|Output Folder}}, switch to {{Code|preset=2|Game's "models" folder}}{{Note|For this to work you have to have your games set up properly by going into the {{Code|preset=3|Set Up Games}} tab}}
# Under the '''Options''' section, make sure that {{Code|preset=2|Game that has the model compiler:}} is set to Portal 2.
# Hit Compile!
 
==Porting the materials==
# After compiling your model, hit {{Code|preset=2|Use in View}} on the bottom bar of Crowbar. Then click on {{Code|preset=2|View}}. This will open [[HLMV]] straight to the model.
# If you have not already ported the materials, your model will appear with a purple and black missing texture. Navigate to the {{Code|preset=3|Model}} tab and look at the {{Code|preset=2|VMTs Loaded}} section. The [[vmt]] files listed here are the ones you will need to port alongside their corresponding [[vtf]] files. Extract them from the original VPK and move them to the corresponding location in Portal 2's directory -- for example, you would place {{Code|preset=2|\materials\models\gman\gman_sheet.vmt}} in {{Code|preset=2|C:\Program Files (x86)\Steam\SteamApps\common\Portal 2\portal2\materials\models\gman\gman_sheet.vmt}}. once again correcting for your Steam install directory.
# Hit F5 to refresh [[HLMV]]. The model should now be perfectly textured.
 
==Fixing the eye material==
This is the step of the porting process that has stayed elusive to most modders.
# Find the [[vmt]] files for the eyes by looking at the {{Code|preset=2|VMTs Loaded}} section of [[HLMV]] again. They will most likely be named eyeball_r.vmt and eyeball_l.vmt. Find them on-disk in your Portal 2 directory and open them.
# Replace the contents of the file with this:
<syntaxhighlight lang="c">
EyeRefract
{
$Iris "iris_texture_goes_here"
$AmbientOcclTexture "models/player/chell/gambler_eye_ao"
$Envmap "Engine/eye-reflection-cubemap-"
$CorneaTexture "Engine/eye-cornea"
$EyeballRadius "0.5"
$AmbientOcclColor "[.6 .4 .3]"
$Dilation ".6"
$ParallaxStrength "0.25"
$CorneaBumpStrength ".5"
$halflambert 1
$nodecal 1
$ambientocclusion 1
 
$RaytraceSphere 1
$SphereTexkillCombo 0
 
}
</syntaxhighlight>
Be sure to replace {{Code|preset=2|iris_texture_goes_here}} with the name of the original texture for [[$iris]]. Hit F5 to reload the model -- you're done!
 
==Fixing the eye texture==
[[File:Gimp hl2 eye texture fix - pupil.jpg|712px|thumb|right|How it should look at this point as described in step 5]]
To have the eye texture appear properly both the iris textures and eyeball textures have to be combined into one single texture.
To do this an image editing program like {{GIMP|4}} or {{ps|4}} is needed.
# Export the eyeball and iris texture from their respective [[vtf]] files
# Next export gambler_eyes.vtf found under {{code|preset=3|\materials\models\player\chell}} in the {{p2|4}} .[[vpk]]
# Import the images into your image editing program of choice {{note|In this tutorial {{GIMP|4}} is used but the process should be similar to your setup}}
# Copy the {{hl2|4}} eyeball texture over to the gambler_eyes texture and scale it to fit the gambler_eyes image size as shown in the image
# Copy and paste the iris texture onto the eyeball texture and merge the two together
# Next copy the alpha channel of gambler_eyes to the {{hl2|4}} eyeball texture. [https://www.youtube.com/watch?v=a7he6tv90gM Tutorial for GIMP]
# Now with that done export the image (without the gambler_eyes texture of course) and it's ready to be reimplemented and be used as the eyeball texture within the new shader{{note|Remember to name it the same as the original eyeball texture}}
{{tip|To create the right version of the texture simply take the left one and flip it horizontally.}}
[[File:Gimp hl2 eye texture fix - pupil - final.jpg|712px|thumb|center|How it should look in the end]]
 
==Important Notes==
* Everything works except automatic lipsync and walking. Lipsyncing will have to be done manually. And by "manual" it means adding your own flexes -- the phoneme system is broken entirely in {{portal2|4}}. (After all, why would it be needed?) However, everything else works, including skeletal animation, facial expression animation, gestures, and eye tracking.
* Walking animations are very buggy. A generic actor when walking will glitch, visually teleporting around and will appear to "lag".
* '''''Ported human models' eyes will just follow the player around no matter their location UNLESS the prop type is set to''''' [[generic_actor]].  At first glance, this appears to remove some features like the {{code|preset=2|SetAnimation}} input. However, [[generic_actor]] grants access to using [[scripted_sequence]] and [[Faceposer]] to animate and choreograph scenes. It can accomplish everything that can be accomplished with prop_dynamic and more, but takes a bit more effort and work, and requires {{path|scenes/scenes.image}} to be distributed along with your BSP.
* To adjust the pupil size of a ported model, it has to be manually resized in the {{code|preset=4|Fixing the eye texture}} step of the porting process. This is due to the limitations of the [[EyeRefract]] shader.
 
==See Also==
* [[Choreography creation]]: For animating the humans
* [[Portal 2 Level Design]]: P2 level creation home page

Revision as of 10:34, 14 December 2023

Template:Multipage

Retrieved from "https://developer.valvesoftware.com/w/index.php?title=Porting_humanoids_to_Portal_2&oldid=359652"