Hammer Manual Configuration
This page needs to be translated.
이 페이지를 번역해야합니다.
이 페이지를 번역해야합니다.
이 페이지에는 부분적으로 만 또는 잘못 번역 된 정보가 포함되어 있거나 아직 번역이 없습니다.
는 경우 이 페이지로 번역할 수 없는 어떤 이유로,또는 왼쪽 번역되지 않은 확장된 기간 동안의 시간 이후 통지를 게시,페이지를 요청해야를 삭제 될 수 있습니다.
또한 기사에서는
대체 언어 가이드
목차
먼저 읽으세요!
당신이 Hammer 에디터를 적절한 게임 환경 설정이 되있지 않은 상태로 실행을 한다면, Hammer 에디터는 Source SDK가 실행된 후 자동으로 에디터 스스로 설정을 맞추지 않습니다. 당신은 설정하는 메뉴얼대로 따라와 문제를 해결할 수 있습니다. 이 단계를 거쳐 잘못된 설정을 고치기 전, 저희는 당신의 설정을 Reset the Source SDK Game Configuration 항목에 나와있는 개요를 따라 한번 수정을 시도해 보는것을 강력하게 추천드립니다
경고:대부분의 경우, Hammer 에디터는 자신 스스로 환경을 설정하고 당신은 이 절차를 읽어보지 않습니다. 만약 당신이 문제가 생겼다면, 게임 설정 초기화 방법이 더 간단합니다. 이 방법을 사용하면, 당신의 모드 설정은 제거 됩니다.
새로운 게임 설정 추가
- Source SDK Launcher를 실행하여 Hammer를 실행하세요.
- First Time Setup 대화 박스가 보인다면, No 버튼을 누르세요:
- 그럼 Configure Hammer 대화 상자가 나타날 것 입니다..
- 가장 위에있는 Edit 버튼을 눌러주세요, 그럼 Configuration 드롭-다운 리스트 항목 옆 Edit Game Configurations 대화 상자가 나타날 것입니다:
- Add 버튼을 누르세요. 그럼 Add a game 대화 상자가 나타날 것입니다:
- "Counter-Strike", "cstrike", "Half-Life 2", "HL2DM" 혹은 당신의 모드 이름을 쓰세요. 이것은 Source SDK Launcher 가 Current Game을 표시할때 나타나는 이름입니다. 정확한 이름은 필요없습니다, 중요한건 이 이름이 당신에게 무슨 의미가 있는가 입니다. OK 버튼을 눌러 당신의 선택을 확인하시고 창을 닫아주세요.
- 이젠 Close 버튼을 누르세요.
게임 경로와 기본적인 매게 변수 설정
- You should now be back in the Configure Hammer dialog with your entry in the Configuration drop-down list:
- Press Add to the right of the Game Data files list. An Open dialog will appear:
- Open the appropriate .FGD file for your configuration:
- For a Counter-Strike: Source configuration, click on
cstrike.fgd
and then the Open button. - For a Half-Life 2 configuration, click on
halflife2.fgd
and then the Open button. - For a Half-Life 2 Deathmatch configuration, click on
hl2mp.fgd
and then the Open button.
- For a Counter-Strike: Source configuration, click on
- Now you'll be back in the Configure Hammer dialog with these fields filled out:
- Type
0.25
into the Default texture scale field. Typetools\toolsskybox
into the Cordon texture field. - Under Game Executable Directory, hit Browse and go to where you have the the game installed.
- For example:
C:\Program Files\Valve\Steam\SteamApps\username\counter-strike source
- where username should be your Steam Login name.
- Use the Following for a mod:
$SteamUserDir\half-life 2
- For example:
- Under Game Directory, copy what you entered into Game Executable Directory, paste it into Game Directory, and add the game directory to the end. The game directory for Counter-Strike is
\cstrike
. For Half-Life 2, it is\hl2
. For Half-Life 2 Deathmatch, it is\hl2mp
.- 예를 들어, Counter-Strike의 설정이라면, 당신의 Game Directory는 아마:
C:\Program Files\Valve\Steam\SteamApps\사용자이름\counter-strike source\cstrike
- Half-Life 2,의 설정이라면, 당신의 Game Directory 아마:
C:\Program Files\Valve\Steam\SteamApps\사용자이름\half-life 2\hl2
- Half-Life 2 Deathmatch,의 설정이라면, 당신의 Game Directory는 아마:
C:\Program Files\Valve\Steam\SteamApps\사용자이름\half-life 2 deathmatch\hl2mp
- 또한, 사용자이름 은 당신의 Steam 로그인 계정 이름입니다.
- 또한 모드는, your Game Directory will be:
$SteamDir\steamapps\SourceMods\MODDIR
- MODDIR 는 당신의 모드의 게임 경로 이름일 것 입니다.
- Hammer Map Directory 항목은, .VMF 파일을 당신이 원하는 곳에 저장하게 만들수 있도록 설정합니다. Source SDK 파일과 경로 구조를 이용해보세요, 당신은 적절한
mapsrc
경로에 맵이 있을겁니다:- Counter-Strike는?:
C:\Program Files\Valve\Steam\SteamApps\사용자이름\sourcesdk_content\cstrike\mapsrc
- Half-Life 2는?:
C:\Program Files\Valve\Steam\SteamApps\사용자이름\sourcesdk_content\hl2\mapsrc
- Half-Life 2 Deathmatch는?:
C:\Program Files\Valve\Steam\SteamApps\사용자이름\
sourcesdk_content\hl2mp\mapsrc
- MOD는?:
- 아마 당신이 현재 작업을 하고 있는 곳일겁니다.
Setting up the Build Programs
- Click on the Build Programs tab:
- Copy and paste the Game executable Directory you entered into the Game Configurations tab previously, then add
\hl2.exe
on the end.- For example, for a Counter-Strike configuration, your Game Executable might be:
$SteamUserDir\counter-strike source\hl2.exe
- For a Half-Life 2 configuration, your Game Executable might be:
$SteamUserDir\half-life 2\hl2.exe
- For a Half-Life 2 Deathmatch configuration, your Game Executable might be:
$SteamUserDir\half-life 2 deathmatch\hl2.exe
- For BSP executable, enter the location of the
vbsp.exe
:Orange Box: $SteamUserDir\sourcesdk\bin\orangebox\bin\vbsp.exe
Ep1 Engine: $SteamUserDir\sourcesdk\bin\ep1\bin\vbsp.exe
- For VIS executable, enter the location of the
vvis.exe
:Orange Box: $SteamUserDir\sourcesdk\bin\orangebox\bin\vvis.exe
Ep1 Engine: $SteamUserDir\sourcesdk\bin\ep1\bin\vvis.exe
- For RAD executable, enter the location of the
vrad.exe
:Orange Box: $SteamUserDir\sourcesdk\bin\orangebox\bin\vrad.exe
Ep1 Engine: $SteamUserDir\sourcesdk\bin\ep1\bin\vrad.exe
- For Place compiled maps in this directory before running the game, add
\maps
the end of the Game Directory:- Example for Counter-Strike:
$SteamUserDir\counter-strike source\cstrike\maps
- Example for Half-Life 2:
$SteamUserDir\half-life 2\hl2\maps
- Example for Half-Life 2 Deathmatch:
$SteamUserDir\half-life 2 deathmatch\hl2mp\maps
- Example for MOD:
$SteamDir\steamapps\SourceMods\MODDIR\maps
- MODDIR is the name of your game directory for your mod.
- Press OK. Hammer is now configured for use.