Working Ladders:ru

From Valve Developer Community
Revision as of 04:08, 30 October 2014 by Kailo (talk | contribs) (Лестницы для Counter Strike: Global Offensive)
Jump to: navigation, search
English Español 한국어


Во всех играх движка Source (кроме Team Fortress 2, где лестниц нет) лестница (англ. ladder) состоит из модели (или браша), который воспринимается игроком как лестница, и невидимой системы энтити/брашей, делающих лестницу работающей. Это создает видимость того, что игрок забирается по видимой модели лестницы, но на самом деле он поднимается именно по этой невидимой системе энтити/брашей.

Видимая часть лестницы

Чтобы создать "видимую" лестницу, вы можете создать объект prop_static с моделью лестницы (например, models/props_c17\metalladder001.mdl), или создать её из брашей, накладывая на них текстуру лестницы (например, metal/metalladder001a).

Climbing system

How the ladder's climbing system is created depends on which Source game it is intended for. Ladders in Half-Life 2 and Half-Life 2: Deathmatch are created a little differently than those of earlier games to provide better control for the level designer and player alike, while ladders in Counter-Strike: Source and Day of Defeat: Source are implemented pretty much the same way as the older games. For how to create ladders for Counter-Strike: Source and Day of Defeat: Source, see below.

Ladder entities for Half-Life 2/DM

To create a ladder you must define the volume in which the player will move through space while on the ladder. This volume can be defined in two ways: Using the func_useableladder entity, or using the deprecated func_ladderendpoint entity (which is only briefly described below to provide understanding of the workings of older maps).

The func_useableladder entity can be divided into two sub entities: a starting point and an ending point (See Fig. 1a). Their positions can be typed into the keyvalue fields, or more typically the ladder volume can be defined using the visual ladder tool, by dragging its center circle that is visible when the entity is selected (See Fig. 1b). Using this tool you can drag the start and end point of the ladder into appropriate positions in the 2D view. The ladder's start and ending point may be of arbitrary orientation and length (See Fig. 1c). Simply pull the endpoints where you want them and the player will move between these points while on the ladder.

Рис. 1а - Точки лестницы (используются две энтити func_ladderendpoint
Рис. 1б - Изменение наклона лестницы
Рис. 1в - Изменённая лестница

As you place the endpoints, make sure that you place them a couple of units away from the visible ladder brush (or any other brush or model) because if any four sides of the ladder volume is even touching against a surface of a brush or a model, this will make that part of the ladder volume unclimbable.

The now obsolete func_ladderendpoint entity just consists of a single endpoint. A ladder volume is created by linking two func_ladderendpoints together using their properties. A ladder volume is created between two func_ladderendpoints by naming one of the endpoints and having the other endpoint point to its name in its Other value. (It is not necessary for the second endpoint to point back at the first as stated in properties.)


Fig. 2 - Dismounts

Along with the volume of movement, you can also provide dismount points for the ladder (See Fig. 2) to allow easier and more controlled dismounts. These points are marked using the info_ladder_dismount entity. While next to and facing one of these markers, the player can press his use key to dismount to the position of the marker (typically when ladders run between more than two floors). If he has reached one of the ends of the ladder, he can also simply walk off the ladder by facing one of the markers nearby and walking forward. You can use multiple info_ladder_dismount markers for each dismount place to provide more directions to exit the ladder in.

To avoid possible confusion between nearby ladders using different dismount markers, each info_ladder_dismount entity has a property value called LadderName which can be used to contain the name of the ladder it belongs to.

Like the ladder volume, the dismount points must be free of obstruction and allow the player to stand at their position without intersecting solid world geometry.

In-game testing

Once you have created your ladders, you can compile your map and test them. If you wish, you can also display the ladder entities in-game along with some debug information by opening the console and typing sv_showladders 1 to enable this, and then load or reload (by typing restart) the map you wish to view. This will show you all the start and end points of the ladders (func_useableladder and func_ladderendpoint entities), as well as the dismount points (info_ladder_dismount entities) (см. Рис. 3а), and can help you determine if these entities are set up properly, if ladder entities are colliding with solid world geometry or the prop model of the ladder itself (см. Рис. 3б), and which func_ladderendpoint entities connect to each other.

Рис. 3а - Как лестницы выглядят в игре (с командой консоли sv_showladders 1)
Рис. 3б - Конечная точка лестницы "застряла" в полу

How ladders work in-game

The safest way to mount a ladder in Half-life 2 is to approach its invisible ladder volume and within reaching distance press the use key. This will automatically position you on the ladder. (You can also walk into the ladder volume, with greater risk of missing it and falling down any hole.)

To dismount a ladder you can always either jump off, or press your use key. If the ladder has info_ladder_dismounts, you can also simply walk off from its endpoints, and pressing your use key while next to and facing an info_ladder_dismount will also allow more controlled dismounts anywhere on the ladder.

Ladders for Counter Strike: Source and Day of Defeat: Source

Create another brush in front of the object/brush you want to be climbable, as close as you can to it, but without touching it. Make sure that the face is the same width/height as the climbable object. Assign the material tools/toolsinvisibleladder to this brush and then tie it to an entity (CTRL+T). Select func_ladder from the Object Properties dialog. You now have a climbable face which is in front of the object/brush.

Fig. 4 - func_ladder textured with tools/toolsinvisibleladder in front of a prop_static ladder.

While on a ladder in CS:S your shooting accuracy will be significantly reduced.

The similar ladders using in Half-Life 1, but there is AAATRIGGER texture used instead of tools/toolsinvisibleladder.

Лестницы для Counter Strike: Global Offensive

Создайте браш с текстурой tools/toolsinvisibleladder перед объектом/брашем, по которому должно быть возможно забираться, так близко на сколько, но не соприкасаясь с ним. Выровняйте ширину и высоту браша так, что бы он был по размерам объекта по которому надо забираться. Готово!

Fig. 5 - World Brush textured with 'tools/toolsinvisibleladder' in front of a prop_static ladder.
Note.png Примечание: Вам НЕ ТРЕБУЕТСЯ преобразовывать браш в func_ladder энтити. Оставьте как есть, после компиляции лестница будет работать.

Optimizing Ladders

The ladder props, like every prop_static, default to using VPhysics for collision detection, which will provide more detailed physics collisions, but in some cases this might not be preferable. In multiplayer maps and very resource demanding maps using VPhysics props costs precious resources, and you might want to sacrifice good physics to avoid potential lag. Here are some good methods to minimize resource cost:

  • If the ladder is for HL2 or HL2:DM, and the ladder is straight, the best method depends on whether somebody is going to be able to shoot through the ladder. If they are not (like if the ladder is against a wall) you could simply change the Collisions keyvalue to Use Bounding Box. If they are, you could change the keyvalue to Not Solid and place an invisible Clip (toolsclip) to detect collision with it instead.
  • If you are creating a slanting ladder for HL2 or HL2:DM, a bounding box will not rotate with the prop, and will obstruct the climbing system, in which case you are better off making the ladder prop Not Solid and place an invisible, rotated Clip (toolsclip) or Player Clip (toolsplayerclip) textured brush alongside the ladder (depending on whether or not somebody is going to be able to shoot through it).
  • If the ladder is for a CS:S or DoD:S map, you could change the Collisions keyvalue to Not Solid and make the func_ladder brush cover the ladder prop, rotating it if necessary.

In multiplayer maps it's also an understood expectation to be able to move freely parallel to the surface that a ladder covers. When it comes to brush based ladders, you can get away with turning the ladder brush into a non-solid func_brush to avoid players getting temporarily "stuck" against the side of the ladder, but when it comes to prop ladders, they are often too protruding from the wall to make a player standing inside a ladder believable. In that case you are probably better off using two Player Clip textured wedges at the sides of the prop, guiding the player to the front of the prop.

If nothing else, you could turn a brush ladder into a func_detail to avoid unnecessary brush leafs.





See also