WiseAssault: HL2 Hitman

From Valve Developer Community
Jump to: navigation, search


SDKNuts Tutorials

WiseAiSound | WiseAltpath | WiseAPC | WiseAssault | WiseAttachment | WiseBoards | WiseBreakableIce | WiseCanisters | WiseClip | WiseClipped | WiseClipPlane | WiseCollapse | WiseColumns | WiseCrush | WiseCubes | WiseCustomSound | WiseDarkness | WiseDim | WiseDispCorner | WiseDisplacement01 | WiseDoor | WiseDoorBreak | WiseElec | WiseElevators | WiseEnding | WiseExplosion | WiseFP01 | WiseGarageDoor01 | WiseGateLock | WiseGateLockMath | WiseGCFScape | WiseGibs | WiseGrass | WiseGravity | WiseHammer | WiseHangLamp | WiseHDR | WiseHINT | WiseHouse | WiseLadder | WiseLaser | WiseLayeredGlass | WiseLevelChange | WiseLight | WiseLighthouse | WiseLightShot | WiseLook | WiseMaterialScroll | WiseMonitors | WiseNodeLink | WiseNPC01 | WiseNPC02 | WiseNPC03 | WiseNPC04 | WiseNPC05 | WiseNPC06 | WiseNPC07 | WiseNPCrapjump | WiseNPCrappel | WiseNPCWeapons | WiseOneWayDoor | WiseOneWayGlass | WiseOneWayPropDoor | WiseOneWayWall | WisePhysbox | WisePhysbox2 | WisePounder | WisePrecip | WiseProps | WisePSPTrans | WisePYR | WiseQuickDecal | WiseSaloonDoors | WiseSeq | WiseShapedLight | WiseSkin | WiseSlidingDoor | WiseSmokeStack | WiseSound | WiseSoundCast | WiseSoundscapes | WiseSpring | WiseSubdivide | WiseSun | WiseTele | WiseTrainLight | WiseTrains | WiseTrains2 | WiseTrains3 | WiseTrains4 | WiseUseableValveWorks | WiseVol | WiseWall | WiseWaterGlass | WiseWaters | WiseWind | WiseWindmill

This tutorial was originally created by wisemx. It was originally posted on SDKnuts.net.

Introduction

WiseAssault ingame.png

This is more of an advanced project and would take far too much time to go into detail on all of the details involved so I’m probably not going to cover everything, but I’ll try.

Events in this project:

  1. Hitman runs after Alyx.
  2. Alyx sees the hitman and runs away.
  3. Hitman assassinates Alyx.
  4. Hitman turns, runs away then stays hidden in the shadows.

Creation

The black effect was created by changing the effects for the npc_metropolice. All that needs to be changed are these two properties:

  • Render Mode: Color
  • FX Color: 0 0 0

You won’t see the change in Hammer but you will once it’s running in HL2.

I didn’t include this next effect in the project but did test with it and the effect was great, however for another project, not this one. What I did was use the attachment point eyes for the npc_metropolice and parent the combine ball model, it looked awesome but unfortunately not like a hitman. See WiseAttachment.

This project is a combination of the following entities:

Refer to those pages for additional help.

You will learn a lot more from this project by working with the sample vmf at the bottom of this page. Make some changes and compile, make additional changes and so on. Be sure to run buildcubemaps after each new compile. The first player in this project is the logic_auto. This is because it will fire off the ai_goal_assault 4 seconds after the map starts.

For the auto:

  • Global State to Read: None
  • Flag: Remove on Fire
  My Output Target Entity Target Input Parameter Delay Only Once
Io11.png OnMapSpawn alyx_assault Activate 4.00 Yes

Properties for the ai_goal_assault called from the logic_auto above.

  • Name: alyx_assault
  • Actor(s) to affect: hitman
  • Rally Point Set: assault_rally
  • Search Type: Entity Name
  • Start Active: No
  • Assault Cue: Don't wait for a cue.

The two ai_relationship entities are active at all times in this project.

  • Subject: hitman
  • Target: alyx01
  • Disposition: Hate
  • Start Active: Yes
  • Reciprocal: No


  • Subject: npc_metropolice
  • Target: !player
  • Disposition: Like
  • Start Active: Yes
  • Reciprocal: No

The two assault_assaultpoint entities and their related assault_rallypoint work together almost like paths for other entities. In this project I have configured these to best simulate the effect of a hitman. You have a lot of flexibility in the way you use these.

Class: assault_rallypoint

  • Name: assault_rally
  • Pitch Yaw Roll: Note, use the Point at button to create a direction of facing.
  • Assault Point: assault_02
  • Assault Delay: 0
  • Priority: 1

Class: assault_assaultpoint

  • Name: assault_01
  • Pitch Yaw Roll: Note, use the Point at button to create a direction of facing.
  • Next assault point: assault_02
  • Assault time out: 0
  • Clear on contact with enemies: Yes
  • Allow diversion: No
  • Never Timout: No
  • Flag: Clear this point on arrival

Class: assault_assaultpoint

  • Name: assault_02
  • Pitch Yaw Roll: Note, use the Point at button to create a direction of facing.
  • Next assault point: (none)
  • Assault time out: 0
  • Clear on contact with enemies: No
  • Allow diversion: No
  • Never Timout: No
  • Flag: Clear this point on arrival

The filter_activator_name entity is used in this project to illustrate how they can be used with an assault to filter for the correct player class by using them with triggers. Its purpose is to make sure only the npc_metropolice triggers the scripted_sequence that will cause Alyx to run away.

trigger_once is a brush based entity created with the brush tool and trigger texture. Once the brush is created you convert it to a trigger_once by pressing Ctrl+T and selecting trigger_once from the list.

  • Start Disabled: No
  • Filter Name: hitman_filter
  • Flag: NPCs
  My Output Target Entity Target Input Parameter Delay Only Once
Io11.png OnTrigger alyxseq BeginSequence 0.00 Yes

Properties for the filter_activator_name.

  • Name: hitman_filter
  • Filter Mode: Allow entities that match criteria
  • Filter Name: hitman

There’s nothing fancy about the two scripted_sequence entities used in this project. One of them is simply used to cause the hitman to run over to it once Alyx is dead. These are the properties for Alyx (npc_alyx).

  • Name: alyx01
  • Weapons: Nothing
  • Flags: Fall to Ground, Don’t drop weapons
  My Output Target Entity Target Input Parameter Delay Only Once
Io11.png OnDamaged alyx01 SetHealth 0 0.00 Yes
Io11.png OnDeath seq01 BeginSequence 1.50 Yes

The first output is important. Alyx is rather difficult to kill and our hitman would stand there shooting at her for some time, but with the help of this one output she will die almost instantly, which will look more like a hit. The second output begins the sequence that will cause our hitman to run away and hide.

These are the properties for the two scripted_sequence entities.

  • Name: alyxseq
  • Target NPC: alyx01
  • Pre action animation: d2_coast03_PostBattle_Idle01
  • Action animation: d2_coast03_PostBattle_Idle01
  • Move to position: Run
  • Flag: Override AI


  • Name: seq01
  • Target NPC: hitman
  • Move to position: Run
  • Flag: Override AI

Notice that seq01, for the hitman, has no Action scripts set. For the overall effect to work Alyx needs to look scared but our hitman is already doing exactly what we want, the sequence used for the hitman simply causes it to run into the corner where it is located. It’s important to set the properties for the npc_metropolice as needed.

  • Name: hitman
  • Render Mode: Color
  • FX Color: 0 0 0
  • Sleep State: None
  • Waiting to Rappel: No
  • Weapons: SMG1
  • Number of Manhacks: None
  • Pistol Starts Drawn: No
  • Flags: Prevent Manhack toss, Allowed to respond to thrown objects, Fall to Ground, Think outside PVS, Don’t drop weapons

There’s nothing special about all of the info_node entities in this project, they are simply placed around the map where the NPC’s might need to walk or run. Take them away and the NPC’s will not be able to follow orders.

I may have missed something and I know this page will be difficult for a lot of mappers to understand but if that’s the case please open the sample project below in Hammer and learn from it instead by experimenting with the entire works hands on. Click on the links I’ve provided on this page for additional help on any of the topics covered in this project.

See also