Template:KV VehicleDriverNPC
BaseNPC:
- Relationship <string> !FGD
- Changes whether this NPC likes or dislikes certain others. Used like the
ai_relationship
entity, with this NPC as the subject. Format:<string|targetname or classname> <string|disposition> <int|rank>
. - Values for
disposition
are:D_HT
: HateD_FR
: FearD_LI
: LikeD_NU
: Neutral
- Target Path Corner
(target)
<targetname> - The
path_corner
that this NPC will move to after spawning.
- Squad Name
(squadname)
<string> - NPCs that are in the same squad (i.e., have matching squad names) will share information about enemies and will take turns attacking and covering each other.
- Hint Group
(hintgroup)
<string> - Hint groups are used by NPCs to restrict their hint-node searching to a subset of the map's hint nodes. Only hint nodes with matching hint group names will be considered by this NPC.
- Hint Limit Nav
(hintlimiting)
<boolean> - Limits NPC to using specified hint group for navigation requests. Does not limit local navigation.
- Sleep State
(sleepstate)
<choices> - Holds the NPC in stasis until specified condition. See also Wake Radius and Wake Squad.
- 0: None
- 1: Waiting for threat
- 2: Waiting for PVS
- 3: Waiting for input, ignore PVS
- 4: Auto PVS
- 5: Auto PVS after PVS
- Wake Radius
(wakeradius)
<float> - Auto-wake if player comes within this distance.
- Wake Squad
(wakesquad)
<boolean> - Wake all of the NPCs squadmates if the NPC is woken.
- Enemy Filter
(enemyfilter)
<targetname> - Filter entity to test targets against.
- Ignore unseen enemies
(ignoreunseenenemies)
<boolean> - Prefers visible enemies, regardless of distance or relationship priority.
- Physics Impact Damage Scale
(physdamagescale)
<float> - Scales damage energy when this character is hit by a physics object. With a value of 0 the NPC will take no damage from physics.
Base:
- Parent
(parentname)
<targetname> - Maintain the same initial offset to this entity. An attachment point can also be used if separated by a comma at the end. (
parentname [targetname],[attachment]
)Tip:Entities transition to the next map with their parentsTip:phys_constraint
can be used as a workaround if parenting fails.
- Origin (X Y Z)
(origin)
<coordinates> - The position of this entity's center in the world. Rotating entities typically rotate around their origin.Note:Hammer does not move the entities accordingly only in the editor.
- Pitch Yaw Roll (X Y Z)
(angles)
<angle> - This entity's orientation in the world. Pitch is rotation around the Y axis, yaw is the rotation around the Z axis, roll is the rotation around the X axis.Note:This works on brush entities, although Hammer doesn't show the new angles.
- Classname
(classname)
<string> !FGD - Determines the characteristics of the entity before it spawns. Tip:Changing this on runtime still has use, like making matching an entry in S_PreserveEnts will persist the entity on new rounds!
- Flags
(spawnflags)
<flags> !FGD - Toggles exclusive features of an entity, its specific number is determined by the combination of flags added.
- Effects
(effects)
<flags> !FGD - Combination of effect flags to use.
- Entity Scripts
(vscripts)
<scriptlist> (in all games since ) (also in ) - Space delimited list of VScript files (without file extension) that are executed after all entities have spawned. The scripts are all executed in the same script scope, later ones overwriting any identical variables and functions. Scripts executed on the worldspawn entity will be placed in root scope.
- Think function
(thinkfunction)
<string> (in all games since ) (also in ) - Name of the function within this entity's script that'll be called automatically every 100 milliseconds, or a user-defined interval if the function returns a number. Avoid expensive operations in this function, as it may cause performance problems.
- Lag Compensation
(LagCompensate)
<boolean> (in all games since ) !FGD - Set to Yes to lag compensate this entity. Should be used very sparingly!
- Is Automatic-Aim Target
(is_autoaim_target)
<boolean> (in all games since ) !FGD - If set to 1, this entity will slow down aiming movement for consoles and joystick controllers when the entity is under the crosshairs.
BaseAnimating:
- Skin
(skin or ModelSkin )
<integer> - Some models have multiple skins. This value selects from the index, starting with 0.
- Collisions
(solid)
<choices> - Method of collision for this entity.
- Body Group
(body or SetBodyGroup)
<integer> !FGD - Sets the the active
$bodygroup
.
- Model Index
(modelindex)
<short> !FGD - Given the number index from dumping the
cl_precacheinfo modelprecache
table, sets entity model to the index.Warning:If an entity has animations that will be played, then the set model also must have its own sequences, else the game crashes. - Model Scale
(modelscale)
<float> (in all games since ) - A multiplier for the size of the model. Negative values are accepted. Does not alter the physics collisions in most cases, however.Warning:Negative or extremely high values can cause crashes!Note:Scale may not appear in Hammer 4.x, but will appear in-game (tested in ). This is fixed in Hammer++.
Animating
- Sequence
(sequence)
<integer> !FGD - Default animation sequence for the model to be playing after spawning.
- Playback Rate
(playbackrate)
<float> !FGD - A multiplier of the framerate at which animations are played, negative values are accepted. Default is 1.0.
- Texture Frame
(texframeindex)
<integer> !FGD - The initial frame number for all animated textures on this entity.
Effects - Render
- Start Fade Distance
(fademindist)
<float> - Distance at which the entity starts fading. If 0 or less, the entity will disappear instantly when end fade is hit. The value will scale appropriately if the entity is in a 3D Skybox.
- End Fade Distance
(fademaxdist)
<float> - Distance at which the entity ends fading. If 0 or less, the entity won't disappear at all. The value will scale appropriately if the entity is in a 3D Skybox.
- Fade Scale
(fadescale)
<float> - If specified in the
worldspawn
, or if the engine is running below DirectX 8, entities will fade out even if the fade distances above aren't specified. This value gives more control over when this happens: numbers smaller than 1 cause the entity to fade out at further distances, and greater than 1 cause it to fade out at closer distances. Using 0 turns off the forced fade altogether. See also$noforcedfade
.
- FX Amount/Transparency (0–255)
(renderamt)
<integer> - Transparency amount, requires a Render Mode other than Normal. 0 is invisible, 255 is fully visible.
- Render Color (R G B)
(rendercolor)
<color255> - Color tint.
- Render FX
(renderfx)
<choices> - Various somewhat legacy alpha effects.
Bug:Alpha effects from 0 to 10 are unavailable due to the bug in code in Counter-Strike: Global Offensive
|
- Render Mode
(rendermode)
<choices> - Set a non-standard rendering mode on this entity.
Effects - Environment
- Disable Shadows
(disableshadows)
<boolean> - Prevent the entity from creating cheap render-to-texture shadows. Does not affect shadow mapping.
- Disable Receiving Shadows
(disablereceiveshadows)
<boolean> - Prevent the entity from receiving shadows on itself.
- Shadow Cast Distance
(shadowcastdist)
<integer> - Sets how far the entity casts dynamic shadows. 0 means default distance from the
shadow_control
entity.
- Lighting Origin
(LightingOrigin)
<targetname> - Select an entity (not
info_lighting
!) from which to sample lighting instead of the entity's origin. Lighting Origin Offset(not in ) !FGD(LightingOriginHack)
<targetname>- Deprecated. The
info_lighting_relative
from which to sample lighting instead of the entity's origin. Use Lighting Origin instead. - Disable Flashlight
(disableflashlight)
<boolean> (in all games since ) - Used to disable projected texture lighting and shadows on this entity. Identical to EF_NOFLASHLIGHT.
- Disable ShadowDepth
(disableshadowdepth)
<boolean> (in all games since ) - Makes this entity not cast a shadow from
env_projectedtexture
entities. Identical to EF_NOSHADOWDEPTH.
- Projected Texture Cache
(shadowdepthnocache)
<choices> (in all games since ) - Used to hint projected texture system whether it is sufficient to cache shadow volume of this entity or to force render it every frame instead. Identical to
EF_SHADOWDEPTH_NOCACHE
.- 0: Default
- 1: No cache—render every frame
- 2: Cache it—render only once
Miscellaneous
- Glow Backface Multiple
(glowbackfacemult)
<float> (only in ) !FGD - If this object has a glow effect, multiply the effect by this much on the sides of the object that are facing away from the viewer.
- Move Type
(MoveType)
<choices> (in all games since ) !FGD - Sets a movetype for this entity, which changes its movement behavior.
|
- Collision Group
(CollisionGroup)
<choices> (in all games since ) !FGD - Sets a collision group for this entity, which changes its collision behavior.
|
- No Animation Sounds
(SuppressAnimSounds)
<boolean> (in all games since ) !FGD - Silences sounds linked to animations.DXLevelChoice:
- Minimum / Maximum DX Level
(mindxlevel / maxdxlevel)
<choices> (removed since ) - The entity will not exist if the engine is running outside the given range of DirectX Versions.
Warning:If these are used, the object may break when the user switches their DirectX settings.
|
- Minimum / Maximum Effect Details Level
(mincpulevel / maxcpulevel)
<choices> (in all games since ) - Don't render for players with Effect Details levels that exceed the minimum or maximum.[Key names are related to
cpu_level
cvar used by Effect Details.]
|
- Minimum / Maximum Shader Details Level
(mingpulevel / maxgpulevel)
<choices> (in all games since ) - Don't render for players with Shader Details levels that exceed the minimum or maximum.[Key names are related to
gpu_level
cvar used by Shader Details.]
|
DamageFilter:
- Damage Filter
(damagefilter)
<targetname> - Name of the
filter_damage_type
entity that controls which entities can damage us.
- Vehicle <targetname>
- Vehicle to drive.