Difference between revisions of "Studiomdl"

Latest revision as of 23:03, 18 July 2019

For a guide to studiomdl's usage, see Compiling a model.

Parameters

The only parameter required is a QC file. Any others must come before it.

studiomdl [options] <path\QC>

General

-game <gamedir>: Override the VProject game path.
-quiet: Suppresses some console output, such as spewing the searchpaths.
-x360: Enable Xbox 360 output, overriding the Gameinfo.txt
-nox360: Disable Xbox 360 output, overriding the Gameinfo.txt
-nowarnings: Disable warnings.
-maxwarnings <int>: Print no more than the specified number of warnings.

Animation

-definebones: See $definebone.
-printbones: Writes extra bone info to the console.
-printgraph: To do: Appears to dump xnode data for each node?
-overridedefinebones: Equivalent to specifying $unlockdefinebones in QC.
-checklengths: Prints engine-ready keyframe data for each animation.

Performance

-fastbuild

Skip processing DX7, DX8, X360, and software VTX variants (use .dx90.vtx only). This speeds up compiling.

-preview

Skip splitting quads into tris. This changes the rendering flags for the model, most likely resulting in slower performance or buggier rendering in-engine.

-fullcollide

Don't truncate really big collision meshes (Ep1 only; OB uses $maxconvexpieces).

-striplods

Ignore all $lod commands.

-minlod <lod>

Throw away data from LODs above the given one (see $minlod).

-mdlreport <path\model.mdl>

Report performance info for an already-compiled model. A QC file is not needed when using this command.

-perf <path\model.mdl>

Same as -mdlreport.

-mdlreportspreadsheet

Report performance info, per LOD, as a comma-delimited spreadsheet. It will appear in the form:

Path to VTX, VTX file extension, LOD number (1 is the root lod), tri count, number of batches rendered, number of materials used

Must be used with -mdlreport or -perf!

Note: It doesn't actually write a spreadsheet to disk.

Debug

-d: Dumps various glview files (10 per LOD per VTX file),
-h: Dump hitboxes to console.
-n: Tag bad normals.
-dumpmaterials: Dump names of used materials to the console.
-i: Ignore warnings.
-t: Replaces all materials with the default pink check pattern
-parsecompletion: Prints an easily parseable message indicating whether the compile was successful or a failure.
-collapsereport: Prints info on which bones are being retained and which bones are being collapsed.

Other

-nop4: Disables Valve's Perforce integration. Unless you actually have Perforce set up for your game/mod (a highly unlikely scenario), you should use this.
-verify: Compile the model, but don't actually write the results to disk.
-a <normal_blend_angle>: Auto-smooth faces equal to or below specified angle. Will override normal data for all meshes.
-f: Flip all triangles.; Bug: Does not work in Orangebox and later builds of Studiomdl. You can achieve the same behavior with $body, however.
-vsi <path\[QC|MDL]>: Generates a VSI file from a QC or MDL.
-stripmodel <path\model.mdl>: Strips down a model, removing its LOD info.
-stripvhv <path\sp_hdr_x.vhv>: Strips down hardware verts (VHV) of their LOD info.
-makefile: Generates a simple makefile for later compiling. It also parses the QC for any errors, and runs in -quiet mode.
-basedir <path>: Runs studiomdl in the context of the provided path.
-tempcontent <path>: Adds the provided path as a content search path.

Nonfunctional

-r: "Tag reversed".
-ihvtest: Probably meant to test the model collision for any physics errors. Skips whatever argument is provided after it.

Input Files

StudioMDL supports a range of input formats. These include SMD, DMX, and OBJ for reference meshes and VTA files for vertex and flex animation. Counter-Strike: Global Offensive also supports FBX, but with limited functionality. Flexes are not directly supported, nor are FBX sequences, however an SMD/DMX sequence can be used on an FBX model.

Note: While FBX does technically seem to support flex animations, an SMD file is required to generate the VTA file, making the use of an FBX file for flexes redundant.

Output files

mymodel.mdl: Skeleton, animations, bounding/hit boxes, surface materials, LOD index...
mymodel.sw.vtx
mymodel.360.vtx
mymodel.dx80.vtx
mymodel.dx90.vtx: Vertex data optimised for software rendering, XBox 360, DirectX 7, 8 and 9 respectively.
Note: .360.vtx files are just byteswapped .dx90.vtx files.
mymodel.vvd: Remaining hardware-agnostic vertex data, including the UV map
mymodel.phy: Collision mesh data

@@ Line 1: / Line 1: @@
 {{otherlang2|ru=Studiomdl:ru|es=Studiomdl:es}}
-{{bug| Attempting to use Studiomdl or a shortcut of it pinned to the taskbar in Windows 8 will result in an invalid target path even when -game and an associated path is specified. However using a shortcut on the desktop still works. This is an issue on microsoft's end unfortunately.}}
 :''For a guide to studiomdl's usage, see [[Compiling a model]].''
 {{toc-right}}
-'''Studiomdl''' is the [[command-line]] tool used to compile [[model]]s from the intermediate [[Studio Model Data]] format exported from modeling packages to the binary .mdl format that is read by the Source engine.
+'''Studiomdl''' is the [[command-line]] tool used to compile [[model]]s from intermediate formats exported from modeling packages to the binary .mdl format that is read by the Source engine.
-It can be found at <code>steam/steamapps/<account>/sourcesdk/bin/[orangebox|ep1]/bin/studiomdl.exe</code>.
+It can be found at <code>"common\<gamename>\<gamefolder>\bin\studiomdl.exe"</code>.
 {{tip|The name "studio" is a throwback to the development of [[Half-Life 1]], during which Valve used [[3D Studio Max]] to create their models.}}
+{{bug| Attempting to use Studiomdl or a shortcut of it pinned to the taskbar in Windows 8 will result in an invalid target path even when -game and an associated path is specified. However using a shortcut on the desktop still works. This is an issue on Microsoft's end unfortunately.}}
 == Parameters ==
@@ Line 20: / Line 19: @@
 === General ===
-; <code>-game <gamedir></code>
+;<code>-game <gamedir></code>
-: Override system-wide game path.
+:Override the VProject game path.
 ;<code>-quiet</code>
-:Theoretically suppresses console output. In practice does nothing.
+:Suppresses <i>some</i> console output, such as spewing the searchpaths.
 ;<code>-x360</code>
-:Enable Xbox 360 output (OB).
+:Enable Xbox 360 output, overriding the [[Gameinfo.txt]]
 ;<code>-nox360</code>
-:Disable Xbox 360 output (Ep1).
+:Disable Xbox 360 output, overriding the [[Gameinfo.txt]]
 ;<code>-nowarnings</code>
 :Disable warnings.
+;<code>-maxwarnings <[[int]]></code>
+:Print no more than the specified number of warnings.
 === Animation ===
@@ Line 38: / Line 39: @@
 : Writes extra bone info to the console.
 ; <code>-printgraph</code>
-: Writes some kind of animation weight graph to the console.
+: {{Todo|Appears to dump xnode data for each node?}}
 ; <code>-overridedefinebones</code>
 : Equivalent to specifying [[$unlockdefinebones]] in QC.
+; <code>-checklengths</code>
+: Prints engine-ready keyframe data for each animation.
 === Performance ===
+; <code>-fastbuild</code>
+: Skip processing DX7, DX8, X360, and software VTX variants (use .dx90.vtx only). This speeds up compiling.
+; <code>-preview</code>
+: Skip splitting quads into tris. This changes the rendering flags for the model, most likely resulting in slower performance or buggier rendering in-engine.
 ; <code>-fullcollide</code>
 : Don't truncate really big [[collision mesh]]es (Ep1 only; OB uses [[$maxconvexpieces]]).
@@ Line 50: / Line 57: @@
 ;<code>-minlod <lod></code>
 :Throw away data from LODs above the given one (see [[$minlod]]).
-;<code>-perf</code>
-:Report performance info in console.
 ;<code>-mdlreport <path\model.mdl></code>
 :Report performance info for an already-compiled model. A QC file is not needed when using this command.
+;<code>-perf <path\model.mdl></code>
+:Same as '''-mdlreport'''.
 ;<code>-mdlreportspreadsheet</code>
-:Report performance info as a comma-delimited spreadsheet. {{TODO|Usage}}
+:Report performance info, per LOD, as a comma-delimited spreadsheet. It will appear in the form:
+:<source>Path to VTX, VTX file extension, LOD number (1 is the root lod), tri count, number of batches rendered, number of materials used </source>
+:'''Must be used with -mdlreport or -perf!''' {{Note|It doesn't actually <i>write</i> a spreadsheet to disk.}}
 === Debug ===
@@ Line 62: / Line 71: @@
 :Dumps various [[glview]] files (10 per LOD per VTX file),
 ;<code>-h</code>
-:Dump [[hitbox]]es to console,
+:Dump [[hitbox]]es to console.
 ;<code>-n</code>
 :Tag bad normals.
@@ Line 70: / Line 79: @@
 :Ignore warnings.
 ;<code>-t</code>
-: Replaces all materials with the default pink check pattern
+:Replaces all materials with the default pink check pattern
+;<code>-parsecompletion</code>
+:Prints an easily parseable message indicating whether the compile was successful or a failure.
+;<code>-collapsereport</code>
+:Prints info on which bones are being retained and which bones are being collapsed.
-=== Unknown ===
+=== Other ===
+;<code>-nop4</code>
+:Disables Valve's Perforce integration. Unless you actually have Perforce set up for your game/mod (a highly unlikely scenario), you should use this.
+;<code>-verify</code>
+:Compile the model, but don't actually write the results to disk.
 ;<code>-a <normal_blend_angle></code>
-:?
+:Auto-smooth faces equal to or below specified angle. Will override normal data for all meshes.
-;<code>-checklengths</code>
-:?
 ;<code>-f</code>
 :Flip all triangles.
+:{{bug|Does not work in Orangebox and later builds of Studiomdl. You can achieve the same behavior with [[$body]], however.}}
+;<code>-vsi <path\[QC|MDL]></code>
+:Generates a [[VSI]] file from a [[QC]] or [[MDL]].
+;<code>-stripmodel <path\model.mdl></code>
+:Strips down a model, removing its LOD info.
+;<code>-stripvhv <path\sp_hdr_x.vhv></code>
+:Strips down hardware verts ([[VHV]]) of their LOD info.
+;<code>-makefile</code>
+:Generates a simple makefile for later compiling. It also parses the QC for any errors, and runs in <code>-quiet</code> mode.
+;<code>-basedir <path></code>
+:Runs studiomdl in the context of the provided path.
+;<code>-tempcontent <path></code>
+:Adds the provided path as a content search path.
+=== Nonfunctional ===
 ;<code>-r</code>
-:"Tag reversed"..?
+:"Tag reversed".
-;<code>-vsi <path\[QC|MDL]></code>
+;<code>-ihvtest</code>
-:Generate stripping information .vsi file. Works with QC and MDL. (Some sort of memory optimisation function? Possibly related to Xbox 360.)
+:Probably meant to test the model collision for any physics errors. Skips whatever argument is provided after it.
-;<code>-stripmodel</code>
-:Process binary model files (VSI?) and strip extra lod data.
+== Input Files ==
-;<code>-stripvhv</code>
+StudioMDL supports a range of input formats. These include [[Studiomdl Data|SMD]], [[DMX model|DMX]], and [[OBJ]] for reference meshes and [[VTA]] files for vertex and flex animation. {{csgo}} [[Counter-Strike: Global Offensive]] also supports [[FBX]], but with limited functionality. [[Flex_animation|Flexes]] are not directly supported, nor are FBX sequences, however an SMD/DMX sequence can be used on an FBX model.
-: Strip hardware verts to match the stripped model.
+{{note|While FBX does technically seem to support flex animations, an SMD file is required to generate the VTA file, making the use of an FBX file for flexes redundant.}}
 == Output files ==
 ;<code>mymodel.mdl</code>
-:[[Skeleton]], animations, bounding/hit boxes, surface materials, [[lod]] index...
+:[[Skeleton]], animations, bounding/hit boxes, surface materials, [[LOD]] index...
 ;<code>mymodel.sw.vtx</code>
+;<code>mymodel.360.vtx</code>
 ;<code>mymodel.dx80.vtx</code>
 ;<code>mymodel.dx90.vtx</code>
-:Vertex data optimised for DirectX 7, 8 and 9 respectively
+:Vertex data optimised for software rendering, XBox 360, DirectX 7, 8 and 9 respectively. {{Note|.360.vtx files are just byteswapped .dx90.vtx files.}}
 ;<code>mymodel.vvd</code>
 :Remaining hardware-agnostic vertex data, including the [[UV map]]
@@ Line 105: / Line 138: @@
 * [[Compiling a model#Common_errors|Common Studiomdl errors]]
+* [[Crowbar]], a popular graphical interface for studiomdl which also supports model decompiling and other advanced features.
 * [[Studiocompiler]], a graphical interface for studiomdl
 * [[GUIStudioMDL]], another graphical interface
 * [[Source Model Compiler]], a web based model compiler and QC generator.
+* [https://gamebanana.com/tuts/12511 Fixing the 5% Weight Bone Link Cull], for SFM
 {{SDKTools}}
 [[Category:Modeling]]

Difference between revisions of "Studiomdl"

Latest revision as of 23:03, 18 July 2019

Contents

Parameters

General

Animation

Performance

Debug

Other

Nonfunctional

Input Files

Output files

See also

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Support

Steam Community

Tools