- 1 Introduction
- 2 Automatic Navigation Mesh Generation
- 3 Editing the Navigation Mesh
- 3.1 The Navigation Mesh Editor
- 3.2 Using Mesh Editing Commands
- 3.3 Basic Mesh Editing Commands
- 3.4 Advanced Editing Techniques
- 4 Navigation Mesh Console Command Reference
A Navigation Mesh represents the "walkable areas" of a map. This data is required by Bots and Hostages in Counter-Strike:Source, allowing them to "know" how to move around in the environment.
Navigation Mesh data is stored in a .nav file corresponding to the map file (.bsp) for which it is used. For example, the nav mesh for
cstrike\maps\de_dust.bsp is stored in
To support the many community-created maps, Counter-Strike:Source includes an automatic mesh generation system. The first time you attempt to play a custom map with bots, the generation system will build a .nav file for that map. Depending on the size and complexity of the map, this may take a few minutes to a few hours. Most maps take about 5 minutes to auto-generate a .nav file. Once the generation is complete, a .nav file is saved to your hard drive for future use.
What is Computed During Generation
The following steps occur during Navigation Mesh generation:
- Starting at a player spawn point, walkable space is sampled by "flood-filling" outwards from that spot, searching for adjacent walkable points
- Rectangular Navigation Areas are constructed from the sampled data
- Hiding and Sniper spots are computed
- Encounter Spots and Approach Points are computed (this can take awhile)
- Initial Encounter areas are computed
Manually Starting the Generation Process
To start the generation process manually, type
nav_generate from the console.
To see the resulting Navigation Mesh, type
nav_edit 1. To turn the mesh editor off, type
Explicity Marking Walkable Areas (ie: "There's no mesh upstairs")
Some maps that have very steep stairs, ramps, or hills may confuse the generation system, resulting in the Navigation Mesh not covering the entire map. To solve this, you can manually place additional walkable markers that tell the generator to search outwards from that point during its sampling phase.
To add one or more walkable markers, first aim your view towards a known walkable spot in your map, then type
nav_mark_walkable in the console. When you are finished placing markers, type
nav_generate to re-generate the mesh.
Quickly Generating Meshes for Testing
The analysis phase of the generator can be quite time consuming. To skip it, type
nav_quicksave 1 in the console.
NOTE: "Quicksaving" skips the analysis phase, and the resultant nav mesh will be missing important data required by the CS Bots and Hostages higher-level planning and attention systems. While useful for testing, editing, and tuning a nav mesh, be sure to do a full analyze (ie: with
nav_quicksave 0) before publishing your nav file to others.
The automated Navigation Mesh generator does a reasonable job of constructing a mesh, allowing you to start using Bots and Hostages on custom maps easily.
However, careful hand-tuning of the Navigation Mesh can markedly improve the performance of Bots. In addition, manually decorating the mesh with Place Names allows the Bots to tell others where events occur, enhances the Counter-Strike radar and includes Place Names in all radio messages.
To enable the editor, type
nav_edit 1 in the console (type
nav_edit 0 to disable it).
- The white cross in the center of your view is the cursor.
- The Navigation Area you are pointing at is the selected area and is shown with a yellow outline.
- Navigation Areas that can be reached from the selected area are shown in red.
- The white line in the selected area denotes where the area will be split if the
nav_splitcommand is executed.
Using Mesh Editing Commands
Although all of the mesh editing commands can be typed in the console, in practise it is far easier to bind these commands to keys. For example,
bind del nav_delete binds the delete key to the command nav_delete. After this binding, pressing the delete key will delete the nav area under your cursor (if you are nav editing mode).
Basic Mesh Editing Commands
To merge two adjacent areas:
- Aim your cursor at the first area and execute
- Aim your cursor at the second area and execute
Note that both areas must be the same size along the edge to be merged.
The resulting area will retain all of the connections of the original two areas, and inherit properties (ie: Place Names, etc) from the marked area.
Splicing creates a new area between two existing areas.
To delete an area, aim your cursor at it and execute
Creating a New Area
To manually create a new area:
- Place your cursor at where a corner of the new area should be
- Move your cursor to drag out the area's extent
Adding and Removing Connections Between Areas
The connections between areas define whether an agent can move from one area to another. Usually these connections are bidirectional, meaning agents can move back and forth between two areas at will. However, sometimes the connection is one way, as in the case of high ledges that can be jumped down, but not back up.
To make a one-way connection from area A to area B (meaning you can move from A to B):
- Place your cursor on area A
- Mark area A with
- Aim your cursor at area B
To make a bidirectional connection, repeat the above steps reversing the roles of A and B.
To remove all connections from areas A and B:
- Aim at area A
- Mark area A with
- Aim at area B
Advanced Editing Techniques
Editing ladders in the nav mesh.
Preventing Excessive Jumping
When to use the
Obstacle Avoidance and Precision Movement
nav_stop to disable local obstacle avoidance behaviors and control bot movement.
Marking Areas to Avoid
nav_avoid to tell bots to avoid the area unless the normal route has become too dangerous.
Controlling Where Bots Can Hide
nav_no_hide to prevent bots from hiding in that area.
How to force the creation of hiding spots during the analysis phase.
Dealing with Rotating Doors
Carving out empty space in the nav mesh to allow for the rotating door.
Lining up Tricky Jumps and Narrow Doorways
Arranging nav areas to force specific paths.
nav_check_file_consistency Scans the maps directory and reports any missing/out-of-date navigation files.
nav_update_blocked Updates the blocked/unblocked status for every nav area.
nav_check_floor Updates the blocked/unblocked status for every nav area.
nav_split_place_on_ground <0|1> If set to 1, nav areas will be placed flush with the ground when split.
nav_area_bgcolor <R> <G> <A> RGBA color to draw as the background color for nav areas while editing.
nav_show_area_info <duration> Duration in seconds to show nav area ID and attributes while editing
nav_snap_to_grid <0|1> If set to 1, snap to the nav generation grid when creating new nav areas
nav_create_place_on_ground <0|1> If set to 1, nav areas will be placed flush with the ground when created by hand.
nav_draw_limit <area count> The maximum number of areas to draw in edit mode
nav_slope_limit <Z> The ground unit normal's Z component must be greater than this for nav areas to be generated.
nav_restart_after_analysis <0|1> If set to 1, when nav nav_restart_after_analysis finishes, restart the server. Turning this off can cause crashes, but is useful for incremental generation.
nav_edit <0|1> Set to one to interactively edit the Navigation Mesh. Set to zero to leave edit mode.
nav_quicksave <0|1> Set to one to skip the time consuming phases of the analysis. Useful for data collection and testing.
nav_show_approach_points <0|1> Show Approach Points in the Navigation Mesh.
nav_show_danger <0|1> Show current 'danger' levels.
nav_show_player_counts <0|1> Show current player counts in each area.
game cheat - Removes jump areas with at most 1 connection to a ladder or non-jump area.
game cheat - Deletes the currently highlighted Area.
game cheat - Selects the current Area and all Areas connected to it, recursively. To clear a selection, use this command again.
game cheat - To split an Area into two, align the split line using your cursor and invoke the split command.
game cheat - Chops the marked area into disconnected sub-areas suitable for sniper spots.
game cheat - To merge two Areas into one, mark the first Area, highlight the second by pointing your cursor at it, and invoke the merge
game cheat - Marks the Area or Ladder under the cursor for manipulation by subsequent editing commands.
game cheat - Clears the marked Area or Ladder.
game cheat - Defines a corner of a new Area or Ladder. To complete the Area or Ladder, drag the opposite corner to the desired location and
issue a 'nav_end_area' command. "nav_end_area"
game cheat - Defines the second corner of a new Area or Ladder and creates it.
game cheat - To connect two Areas, mark the first Area, highlight the second Area, then invoke the connect command. Note that this creates a
ONE-WAY connection from the first to the second Area. To make a two-way connection, also connect the second area to the first. "nav_disconnect"
game cheat - To disconnect two Areas, mark an Area, highlight a second Area, then invoke the disconnect command. This will remove all
connections between the two Areas. "nav_splice"
game cheat - To splice, mark an area, highlight a second area, then invoke the splice command to create a new, connected area between them.
game cheat - Toggles the 'must crouch in this area' flag used by the AI system.
game cheat - Toggles the 'dont avoid obstacles' flag used by the AI system.
game cheat - Toggles the 'traverse this area by jumping' flag used by the AI system.
game cheat - Toggles the 'dont jump in this area' flag used by the AI system.
game cheat - Toggles the 'must stop when entering this area' flag used by the AI system.
game cheat - Toggles the 'traverse this area by walking' flag used by the AI system.
game cheat - Toggles the 'traverse this area by running' flag used by the AI system.
game cheat - Toggles the 'avoid this area when possible' flag used by the AI system.
game cheat - Toggles the 'area is transient and may become blocked' flag used by the AI system.
game cheat - Toggles the 'area is not suitable for hiding spots' flag used by the AI system.
game cheat - Toggles the 'stand while hiding' flag used by the AI system.
game cheat - Toggles the 'hostages cannot use this area' flag used by the AI system.
game cheat - Strips all Hiding Spots, Approach Points, and Encounter Spots from the current Area.
game cheat - Saves the current Navigation Mesh to disk.
game cheat - Loads the Navigation Mesh for the current map.
game cheat - If used without arguments, all available Places will be listed. If a Place argument is given, the current Place is set.
game cheat - Replaces all instances of the first place with the second place.
game cheat - Lists all place names used in the map.
game cheat - Toggle the editor into and out of Place mode. Place mode allows labelling of Area with Place names.
game cheat - Sets the editor into or out of Place mode. Place mode allows labelling of Area with Place names.
game cheat - Sets the Place of the Area under the cursor to the curent Place, and 'flood-fills' the Place to all adjacent Areas. Flood-
filling stops when it hits an Area with the same Place, or a different Place than that of the initial Area. "nav_place_pick"
game cheat - Sets the current Place to the Place of the Area under the cursor.
game cheat - Toggles Place Painting mode. When Place Painting, pointing at an Area will 'paint' it with the current Place.
game cheat - Mark an Area with no Place name. Useful for finding stray areas missed when Place Painting.
game cheat - Select a corner of the currently marked Area. Use multiple times to access all four corners.
game cheat - Raise the selected corner of the currently marked Area.
game cheat - Lower the selected corner of the currently marked Area.
game cheat - Places the selected corner of the currently marked Area on the ground.
game cheat - Warps the player to the marked area.
game cheat - Flips the selected ladder's direction.
game cheat - Generate a Navigation Mesh for the current map and save it to disk.
game cheat - Generate a Navigation Mesh for the current map and save it to disk.
game cheat - Re-analyze the current Navigation Mesh and save it to disk.
game cheat - Mark the current location as a walkable position. These positions are used as seed locations when sampling the map to generate a
Navigation Mesh. "nav_clear_walkable_marks"
game cheat - Erase any previously placed walkable positions.
game cheat - Re-orders area and ladder ID's so they are continuous.
game cheat - Draws the bounding boxes of all func_ladders in the map.
game cheat - Attempts to build a nav ladder on the climbable surface under the cursor.
Addition information can be found here.