env_smokestack

From Valve Developer Community
Revision as of 06:48, 1 October 2018 by Pinsplash (talk | contribs) (updates)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
env_smokestack using the FGD defaults.

env_smokestack is a point entity available in all Source games. It spits out a constant stream of smoke. You can place up to two env_particlelights near the smoke stack to add ambient light to its particles.

In code, it is represented by class CSmokeStack, defined in smokestack.cpp.

Keyvalues

Initial State (InitialState) <choices>
Initial state of the entity.
  • 0: Off
  • 1: On
Spread at the base (BaseSpread) <integer>
Amount of random spread in the origins of the smoke particles when they're spawned.
Spread Speed (SpreadSpeed) <integer>
Amount of random spread in the velocity of the smoke particles after they're spawned.
Speed (Speed) <integer>
The speed at which the smoke particles move after they're spawned.
Particle start size (StartSize) <integer>
Size of the smoke particles when they're first emitted.
Particle end size (EndSize) <integer>
Size of the smoke particles at the point they fade out completely.
Emission rate (Rate) <integer>
Rate at which to emit smoke particles (i.e. particles to emit per second).
Length of smoke trail (JetLength) <integer>
Length of the smokestack. Lifetime of the smoke particles is derived from this & particle speed.
Wind X/Y Angle (WindAngle) <angle>
This specifies the wind direction. It is an angle in the XY plane.
Wind Speed (WindSpeed) <integer>
The strength of the wind.
Particle material (SmokeMaterial) <string>
Material of the smoke particles emitted by this stack.
Twist (Twist) <integer>
The amount, in degrees per second, that the smoke particles twist around the origin.
Roll Speed (Roll) <float>
Amount of roll in degrees per second.
Base Color (R G B) (rendercolor) <color255>
The color of the particles.
Translucency (renderamt) <integer>
How much you can see through the particles.
Wind Vector (Wind) <vector> !FGD
Wind direction, not limited to any axis.

Base:

Classname (classname) <string>
The classname defines the type of entity. Classnames can be changed using AddOutput, which will influence how the engine deals with the entity in certain circumstances.
Name (targetname) <string>
The name that other entities refer to this entity by.
Global Entity Name (globalname) <string>
Name by which this entity is linked to another entity in a different map. When the player transitions to a new map, entities in the new map with globalnames matching entities in the previous map will have the previous map's state copied over their state.
Parent (parentname) <targetname>
Specifies a movement parent. An entity will maintain its initial offset from its parent. An attachment point can be added to the end of the name, separated by a comma. Every entity can be parented, even point entities. Entities which are parented will be forced to transition to the next map, such as from a trigger_transition. Some entities which aren't intended to be parented may not function correctly. phys_constraint can be used as a workaround to parenting.
Origin (X Y Z) (origin) <coordinates>
The position of this entity's center in the world. Rotating entities typically rotate around their origin.
Pitch Yaw Roll (X Y Z) (angles) <angle>
This entity's orientation in the world. Pitch is rotation around the Y axis, yaw is the rotation around the Z axis, roll is the rotation around the X axis.
Note:This works on brush entities, although Hammer doesn't show the new angles.
Flags (spawnflags) <integer>
Toggles features of an entity, its specific number is determined by the combination of flags added.
Response Contexts (ResponseContext) <string>
Pre-defined response system contexts for this entity. Format is key:value,key:value,.... Contexts may be filtered.
Effects (effects) <integer> !FGD
Combination of effect flags to use.
Local Time (ltime) <float> !FGD
The local time of the entity, independent of the global clock. Used mainly for physics calculations.
Next Think (nextthink) <float> !FGD
Amount of time before the entity thinks again.
Hammer ID (hammerid) <integer> !FGD
The entity's Hammer ID. Mainly used by plugins and debugging commands, such as ent_keyvalue. Can be manually assigned with the "hammerid" or "id" keyvalue. Entities spawned at run-time are not assigned any Hammer ID.
Disable for Xbox 360 (disableX360) <boolean> (New with Left 4 Dead 2) !FGD
If Yes, disables this entity on the Xbox 360 version of Source.
Entity Scripts (vscripts) <scriptlist> (New with Left 4 Dead 2)
Space delimited list of VScript files (without file extension) that are executed after all entities have spawned. The scripts are all executed in the same script scope, later ones overwriting any identical variables and functions.
Script think function (thinkfunction) <string> (New with Left 4 Dead 2)
Name of a function in this entity's script which will be called automatically every 100 milliseconds (ten times a second) for the duration of the script. It can be used to create timers or to simulate autonomous behavior. The return value (if present) will set the time until the next call. Try to avoid expensive operations in this function, as it may cause performance problems.
Lag Compensation (LagCompensate) <boolean> (New with Left 4 Dead 2) !FGD
Set to Yes to lag compensate this entity. Should be used very sparingly!
Is Automatic-Aim Target (is_autoaim_target) <boolean> (New with Counter-Strike: Global Offensive) !FGD
If set to 1, this entity will slow down aiming movement for consoles and joystick controllers when the entity is under the crosshairs.

Inputs

TurnOn
Turn on the smokestack.
TurnOff
Turn off the smokestack.
Toggle
Toggles the smokestack between on and off state.
JetLength  <integer>
Sets Length of smoke trail.
Rate  <integer>
Sets Emission rate.
Speed  <integer>
Sets Speed.
SpreadSpeed  <integer>
Sets Spread Speed.
Color  <color255> !FGD
Sets Base Color.
Alpha  <integer> !FGD
Sets Translucency.

Base:

Kill
Removes this entity and any entities parented to it from the world.
KillHierarchy
Functions the same as Kill, although this entity and any entities parented to it are killed on the same frame, being marginally faster than Kill.
SetParent  <string>
Move with this entity. See Entity Hierarchy (parenting).
SetParentAttachment  <string>
Change this entity to attach to a specific attachment point on its parent. The entity will teleport so that the position of its root bone matches that of the attachment. Entities must be parented before being sent this input.
SetParentAttachmentMaintainOffset  <string>
As above, but without teleporting. The entity retains its position relative to the attachment at the time of the input being received.
ClearParent
Removes this entity from the the movement hierarchy, leaving it free to move independently.
AddOutput  <string>
Evaluates a keyvalue/output on this entity.
Format: <key> <value>
Format: <output name> <targetname>:<inputname>:<parameter>:<delay>:<max times to fire, -1 means infinite>
FireUser1 to FireUser4
Fire the OnUser outputs; see User Inputs and Outputs.
Use  !FGD
Same as a player invoking +use; may not do anything. Can also be invoked by creating an output that does not specify an input.
This input is not included in Valve's FGDs.
DispatchEffect  <string> !FGD
Dispatches a special effect from the entity's origin. Removed and replaced entirely by the particle system since <Left 4 Dead>.
DispatchResponse  <string> !FGD
Dispatches a response to the entity. See Response and Concept.
AddContext  <string>
Adds to the entity's list of response contexts. Format is <key>:<value>.
RemoveContext  <string>
Remove a context from this entity's list. The name should match the key of an existing context.
ClearContext  <string>
Removes all contexts from this entity's list.
RunScriptFile  <script> (New with Left 4 Dead 2)
Execute a VScript file from disk, without file extension. The script contents are merged with the script scope of the receiving entity.
RunScriptCode  <string> (New with Left 4 Dead 2)
Execute a string of VScript source code in the scope of the entity receiving the input. String quotation may be needed when fired via console.
Bug:  In <Left 4 Dead 2>, the code is executed in the script scope of the entity that fires the output, not the one receiving the input.
Warning: Never try to pass string parameters to a script function with this input. It will corrupt the VMF structure because of the nested quotation marks, which then must be removed manually with a text editor.
CallScriptFunction  <string> (New with Left 4 Dead 2) !FGD
Execute a VScript function in the scope of the receiving entity.
SetLocalOrigin  <coordinates> (New with Alien Swarm) !FGD
Send this entity to a spot in the map. If the entity is parented to something, it will be offset from the parent by this amount.
SetLocalAngles  <angles> (New with Alien Swarm) !FGD
Set this entity's angles.

Outputs

Base:

OnUser1 to OnUser4
These outputs each fire in response to the firing of the like-numbered FireUser1 to FireUser4 Input; see User Inputs and Outputs.
OnKilled  (Only in the Left 4 Dead series)
This output fires when the entity is killed and removed from the game.