Adding a Dynamic Scope

From Valve Developer Community
Jump to: navigation, search
English (en)中文 (zh)
Edit
Dyscope rest.jpg
Dyscope aim.jpg

This article will deal with creating a dynamic scope, which uses a render target on the weapon model to draw the player's view. This code was created and run on the Source 2006 Source 2006 source code, but it should work in other versions too.

Note.pngNote:There can apparently only be one render target on a model at a time. If you try to use this code and overlay it with another effect (e.g. refraction to simulate a lens), only one of the targets will be drawn.
Note.pngNote:The modified crossbow model as seen on the right is available for download here

The Code

Firstly, create two new files - in the code they are called tne_RenderTargets.cpp and tne_RenderTargets.h. Add them to the client project. They deal with the custom render targets interface. Moreover, baseclientrendertargets.cpp needs to be added (and subsequently the header of it) to the client project in order to avoid unresolved externals. Although, other versions of SDK might already have it in.

Here's what should be pasted in each, with proper explanation.

tne_RenderTargets.cpp (new file)

#include "cbase.h"
#include "tne_RenderTargets.h"
#include "materialsystem\imaterialsystem.h"
#include "rendertexture.h"
 
ITexture* CTNERenderTargets::CreateScopeTexture( IMaterialSystem* pMaterialSystem )
{
//	DevMsg("Creating Scope Render Target: _rt_Scope\n");
	return pMaterialSystem->CreateNamedRenderTargetTextureEx2(
		"_rt_Scope",
		1024, 1024, RT_SIZE_OFFSCREEN,
		pMaterialSystem->GetBackBufferFormat(),
		MATERIAL_RT_DEPTH_SHARED, 
		TEXTUREFLAGS_CLAMPS | TEXTUREFLAGS_CLAMPT,
		CREATERENDERTARGETFLAGS_HDR );
  
}

//-----------------------------------------------------------------------------
// Purpose: Called by the engine in material system init and shutdown.
//			Clients should override this in their inherited version, but the base
//			is to init all standard render targets for use.
// Input  : pMaterialSystem - the engine's material system (our singleton is not yet inited at the time this is called)
//			pHardwareConfig - the user hardware config, useful for conditional render target setup
//-----------------------------------------------------------------------------
void CTNERenderTargets::InitClientRenderTargets( IMaterialSystem* pMaterialSystem, IMaterialSystemHardwareConfig* pHardwareConfig )
{ 
	m_ScopeTexture.Init( CreateScopeTexture( pMaterialSystem ) ); 

	// Water effects & camera from the base class (standard HL2 targets) 
	BaseClass::InitClientRenderTargets( pMaterialSystem, pHardwareConfig );
}
  
//-----------------------------------------------------------------------------
// Purpose: Shut down each CTextureReference we created in InitClientRenderTargets.
//			Called by the engine in material system shutdown.
// Input  :  - 
//-----------------------------------------------------------------------------
void CTNERenderTargets::ShutdownClientRenderTargets()
{ 
	m_ScopeTexture.Shutdown();
  
	// Clean up standard HL2 RTs (camera and water) 
	BaseClass::ShutdownClientRenderTargets();
}
 
//add the interface!
static CTNERenderTargets g_TNERenderTargets;
EXPOSE_SINGLE_INTERFACE_GLOBALVAR( CTNERenderTargets, IClientRenderTargets, CLIENTRENDERTARGETS_INTERFACE_VERSION, g_TNERenderTargets  );
CTNERenderTargets* TNERenderTargets = &g_TNERenderTargets;

This class derives from CBaseClientRenderTargets, an interface made by Valve. CreateScopeTexture() function is called by the engine in InitClientRenderTargets(), in order to Init m_ScopeTexture (our scope render target texture) and it is also released in ShutdownClientRenderTargets().

tne_RenderTargets.h (new file)

#ifndef TNERENDERTARGETS_H_
#define TNERENDERTARGETS_H_
#ifdef _WIN32
#pragma once
#endif
 
#include "baseclientrendertargets.h" // Base class, with interfaces called by engine and inherited members to init common render   targets
 
// externs
class IMaterialSystem;
class IMaterialSystemHardwareConfig;
 
class CTNERenderTargets : public CBaseClientRenderTargets
{ 
	// no networked vars 
	DECLARE_CLASS_GAMEROOT( CTNERenderTargets, CBaseClientRenderTargets );
public: 
	virtual void InitClientRenderTargets( IMaterialSystem* pMaterialSystem, IMaterialSystemHardwareConfig* pHardwareConfig );
	virtual void ShutdownClientRenderTargets();
 
	ITexture* CreateScopeTexture( IMaterialSystem* pMaterialSystem );

private:
	CTextureReference		m_ScopeTexture; 
};
 
extern CTNERenderTargets* TNERenderTargets;
 
#endif //TNERENDERTARGETS_H_

This is the header file, it's pretty self-explanatory - it overrides virtual functions from CBaseClientRenderTargets.

rendertexture.cpp

//=============================================================================
// Dynamic Scope Texture
//=============================================================================
static CTextureReference s_pScopeTexture;
ITexture *GetScopeTexture( void )
{ 
	if ( !s_pScopeTexture )
	{
		s_pScopeTexture.Init( materials->FindTexture( "_rt_Scope", TEXTURE_GROUP_RENDER_TARGET ) );
		Assert( !IsErrorTexture( s_pScopeTexture ) );
		AddReleaseFunc();
	}
	return s_pScopeTexture;
}

Put this somewhere near GetCameraTexture function. It provides as a function which finds & returns Render Target Texture;

//Release the scope render target too
s_pScopeTexture.Shutdown();

Add this code to void ReleaseRenderTargets( void ). It handles the removal of render target.

rendertexture.h

Add this line after ITexture *GetCameraTexture();:

//Dynamic Scope Texture
ITexture *GetScopeTexture();

view.cpp

void CViewRender::DrawScope( const CViewSetup &viewSet )
{
	C_BasePlayer *localPlayer = C_BasePlayer::GetLocalPlayer();

	if(!localPlayer)
		return;

	if( !localPlayer->GetActiveWeapon() )
		return;

	if( !localPlayer->GetActiveWeapon()->GetViewModel() )
		return;

	//Copy our current View.
	CViewSetup scopeView = viewSet;

	//Get our camera render target.
	ITexture *pRenderTarget = GetScopeTexture();

	if( pRenderTarget == NULL )
		return;

	if( !pRenderTarget->IsRenderTarget() )
		Msg(" not a render target");

	//Our view information, Origin, View Direction, window size
	//	location on material, and visual ratios.
	scopeView.width = pRenderTarget->GetActualWidth();
	scopeView.height = pRenderTarget->GetActualHeight();
	scopeView.x = 0;
	scopeView.y = 0;
	scopeView.fov = localPlayer->GetActiveWeapon()->GetZoomFOV();
	scopeView.m_bOrtho = false;

	scopeView.m_flAspectRatio = 1.0f;

	int nClearFlags = VIEW_CLEAR_DEPTH | VIEW_CLEAR_COLOR;
	bool bDrew3dSkybox = false;	// bDrew3dSkybox = true turns the skybox OFF. DO NOT SET IT TO TRUE.
	bool bSkyboxVisible = true;

	//Set the view up and output the scene to our RenderTarget (Scope Material).
	render->Push3DView( scopeView, VIEW_CLEAR_DEPTH | VIEW_CLEAR_COLOR, true, pRenderTarget, m_Frustum );
	Draw3dSkyboxworld( scopeView, nClearFlags, bDrew3dSkybox, bSkyboxVisible);
	ViewDrawScene( bDrew3dSkybox, bSkyboxVisible, scopeView, 0, VIEW_MONITOR );
	
	render->PopView( m_Frustum );
}

This code is very similar to DrawCamera one. Basically, it copies the current view, assigns the render target to a texture pointer, then sets some basic options for scopeView like width, height, position, etc. The FOV is set here with reference to a value set in the weapon's script file and be elaborated upon.

viewrender.h

void DrawScope( const CViewSetup &cameraView );

Put this after DrawCamera.

view_scene.cpp

//Draw the scope too
if(g_pMaterialSystemHardwareConfig->GetDXSupportLevel() >= 70 )
{
	DrawScope( view );
}

It draws the scope vision if you have a DirectX 7 capable card (lowers are not supported). Put this code in RenderViewEx() just after the #ifdef USE_MONITORS #endif block in the beginning of the function.

Episode 2 Engine Fixes

viewrender.cpp

Place the DrawScope( ... ) function in viewrender.cpp after DrawMonitors( ... ), instead of in view.cpp.

Change:

	int nClearFlags = VIEW_CLEAR_DEPTH | VIEW_CLEAR_COLOR;
	bool bDrew3dSkybox = false;	// bDrew3dSkybox = true turns the skybox OFF. DO NOT SET IT TO TRUE.
	bool bSkyboxVisible = true;

	//Set the view up and output the scene to our RenderTarget (Scope Material).
	render->Push3DView( scopeView, VIEW_CLEAR_DEPTH | VIEW_CLEAR_COLOR, true, pRenderTarget, m_Frustum );
	Draw3dSkyboxworld( scopeView, nClearFlags, bDrew3dSkybox, bSkyboxVisible);
	ViewDrawScene( bDrew3dSkybox, bSkyboxVisible, scopeView, 0, VIEW_MONITOR );

	render->PopView( m_Frustum );

To:

	//Set the view up and output the scene to our RenderTarget (Scope Material).
	render->Push3DView( scopeView, VIEW_CLEAR_DEPTH | VIEW_CLEAR_COLOR, pRenderTarget, GetFrustum() );

	SkyboxVisibility_t nSkyboxVisible = SKYBOX_NOT_VISIBLE;
	int ClearFlags = 0;
	CSkyboxView *pSkyView = new CSkyboxView( this );
	if( pSkyView->Setup( scopeView, &ClearFlags, &nSkyboxVisible ) != false )
		AddViewToScene( pSkyView );
	SafeRelease( pSkyView );

	ViewDrawScene( false, SKYBOX_3DSKYBOX_VISIBLE, scopeView, VIEW_CLEAR_DEPTH, VIEW_MONITOR );
	
	render->PopView( m_Frustum );

Change:

scopeView.fov = localPlayer->GetActiveWeapon()->GetZoomFOV();

To:

scopeView.fov = 45;
Note.pngNote:GetZoomFOV() isn't a default float function. It needs to be added to C_BaseCombatWeapon in order to work, or hardcoded as shown above.

Place this in viewrender.cpp at the end of CViewRender::RenderView

		if(g_pMaterialSystemHardwareConfig->GetDXSupportLevel() >= 70 )
		{
			DrawScope( view );
		}

Right above

	render->PopView( GetFrustum() );
	g_WorldListCache.Flush();

instead of view_scene.cpp

Place this in viewrender.h below Drawmonitors

void DrawScope(const CViewSetup &cameraView);

The scopes should now work in any Episode 2 based Game.

Special thanks to omega from hlcoders mailing list, who shared his code and pointed the writer in the right direction.

The .vmt file

Created a new .vmt file that will setup the texture and allow it to be attached to a gun. Put inside:

UnlitGeneric
{
	$basetexture _rt_Scope
	$model 1
}

It takes the newly created _rt_Scope texture and sets it up to be useable for texturing models. Then just put the _rt_Scope texture on your weapon model!

Change dynamic FOV in script

This is for those who do not know how to make different FOV for different weapons.


For example, your sniper rifle has a 9-fold increase (for example the POSP 3-9×42). And ACOG increase, for example, is 4x. This big difference can be corrected by simply adding it to the weapon's script after "default_dynamic_fov". We'll be adding this below.


weapon_parse.cpp

1. After:

iDefaultClip2 = pKeyValuesData->GetInt( "default_clip2", iMaxClip2 ); // amount of secondary ammo placed in the secondary clip when it's picked up


add this:

iDefaultIsFOV = pKeyValuesData->GetInt("default_dynamic_fov", 45.0f ); //changeable FOV in a script
Note.pngNote:45.0f - this is the default value. It's very important value! 45 it's like 1x. For example 15 it's like 4x.


2. - In FileWeaponInfo_t::FileWeaponInfo_t() after

iDefaultClip2 = 0;


add this:

iDefaultIsFOV = 0; // changeable FOV in a script

weapon_parse.h

After

int iDefaultClip2; // amount of secondary ammo in the gun when it's created


add this:

int iDefaultIsFOV; // changeable FOV in a script


basecombatweapon_shared.cpp

Find:

//-----------------------------------------------------------------------------
// Purpose: 
//-----------------------------------------------------------------------------
bool CBaseCombatWeapon::UsesClipsForAmmo2( void ) const
{
	return ( GetMaxClip2() != WEAPON_NOCLIP );
}


And after this bool add new int:

//-----------------------------------------------------------------------------
// Purpose:  changing the FOV in a script
//-----------------------------------------------------------------------------
int CBaseCombatWeapon::GetDefaultIsFOV(void) const
{
	return GetWpnData().iDefaultIsFOV;
}


basecombatweapon_shared.h

After:

	virtual int GetDefaultClip2( void ) const;

Add this:

	virtual int GetDefaultIsFOV(void) const; // changeable FOV in a script


So, now the game can read some information about "dynamic FOV" weapons in the script. And you can call this information with the help of "GetDefaultIsFOV". Let's do this!


viewrender.cpp

Find void CViewRender::DrawScope(const CViewSetup &viewSet) and change scopeView.fov = 45; like this:

	scopeView.fov = localPlayer->GetActiveWeapon()->GetDefaultIsFOV(); // changeable FOV in a script

weapon_crossbow.txt

For example, I'll use the crossbow. Just add after "secondary_ammo" "None" "default_dynamic_fov" "15" like this:

	...
	"primary_ammo"		"XBowBolt"
	"secondary_ammo"	"None"

	"default_dynamic_fov"	"15" // Без увеличения = 45 (Стандарт). 15 это примерно x4. Не ставить числа с "-" и "0".
	...

Conclusion

That's all.

Note.pngNote:"default_dynamic_fov" must be over 0. If you will use "-" image will be turned. 1x becomes 45, 4x becomes 15 (about).

--Slam12f (talk) 03:37, 22 October 2015 (UTC)